Help! Need UN65F8000 Service Menu ADC/WB settings - AVS Forum
Forum Jump: 
 
Thread Tools
post #1 of 3 Old 08-24-2014, 07:48 PM - Thread Starter
Member
 
darkvader001's Avatar
 
Join Date: Jan 2012
Posts: 105
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked: 10
Help! Need UN65F8000 Service Menu ADC/WB settings

Hi,

I looking for one owner of the Samsung LED UN65F8000 series. Like an idiot I played with my White Balance settings (couple of digits) in the service menu, but I cannot get back to original settings

So I'm looking for someone that can give me the original settings of this item in the service menu.

How to work:
Put the TV on an HDMI input source, Turn TV OFF, then press on the remote: MENU then 1, 8, 2 and in the end POWER to put the Tv on again. The tv is now starting up and service menu will appear in a couple of seconds.

Well now the settings:

Go to ADC/WB -> White Balance.

here you can see some settings like:

Sub Brightness
R Offset
G Offset
B Offset
Sub Contrast
R Gain
G Gain
B Gain

I need the digits behind thos settings.

I need the settings behind ADC/WB -> ADC Results too.

So can someone please send me an e-mail or post it here?

Kind Regards,

Darkvader
darkvader001 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 08-24-2014, 08:22 PM
AVS Special Member
 
Otto Pylot's Avatar
 
Join Date: May 2004
Location: San Jose, CA
Posts: 7,540
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 226 Post(s)
Liked: 265
Keep in mind that the SM settings are set at the factory and are based, in part, on how the main board(s) QC and can be component specific. In other words, a setting of "5" for example, might not have the same result as a "5" on another tv of the exact same model and build. Good luck.
Otto Pylot is offline  
post #3 of 3 Old 08-24-2014, 08:35 PM - Thread Starter
Member
 
darkvader001's Avatar
 
Join Date: Jan 2012
Posts: 105
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked: 10
Quote:
Originally Posted by Otto Pylot View Post
Keep in mind that the SM settings are set at the factory and are based, in part, on how the main board(s) QC and can be component specific. In other words, a setting of "5" for example, might not have the same result as a "5" on another tv of the exact same model and build. Good luck.
At this point is better than nothing :-), Hopefully someone can help me. I figure that my best bet is to get the numbers from someone that have the same exact model and size.

I know the panel version may be different but at least it will be something close enough to get me closer to what it was for mine.

Last edited by darkvader001; 08-24-2014 at 08:40 PM.
darkvader001 is offline  
Reply Display Calibration

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off