Join Date: Feb 2012
Location: Orange County California
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Have a 65 inch LED with about the same on wall setup, 15 feet eye to panel, and just a little lower on panel center, works just fine. One of the, I think, big mistakes I have seen is having them to HIGH.
The input jacks are on the bottom left, so make sure you have room to get under there to see what you are doing. As for tilt, at this level you really won't need any, but incase you do the knobs are on the bottom. 8 cm or about 3 inches is about right for this big of a TV, giving room to get your hand back there. I have 4 1/2 inches from the back of panel to wall, I like a little extra. I do all my installations, and the only time I wanted one flat on the wall was for a 47 inch LED that could be seen from the side.
I inclose all my cables and the one problem I had with this big LED was were to put the AV gear, I found a little 2 shelf wall mount at Monoprice.com that holds what I want, and nothing on the floor.