Hopefully someone can point me in the right direction before I start spending money. I have a Barco Data 600.After a power outage at my home the unit no longer shows any life in the crts. The problem is that I don't know if the problem resides in the remote or the projetor. The remote is a standard Barco rcvds unit (not quad 4) with the 15 pin interface. I do not use the remote for anything but projector control all video is handled by a seperate unit. On the projector there is a double row of led's (the unit is ceiling mounted) both rows of leds are illuminated the top row from left to right is red,amber,amber,amber and the lower is green,amber,amber,amber. If i disconnect either video in or the control cable the lower green goes out can I interperate this to mean that both video and control are at least reaching the projector and that the fault must reside at the projector. Any help would be greatly appreciated.