AVS Forum Addicted Member
Join Date: Oct 2003
Mentioned: 470 Post(s)
Tagged: 1 Thread(s)
Quoted: 2462 Post(s)
congrats joe, did you go for 16 or 32? :-)~
seriously, this is a great driver that works well with the behringer amps in a set of four.
a single driver wired in parallel gives 4 ohms and two wired in parallel gives 2 ohms.
hooked up to one channel of a ep4000 or inuke3000 provides about 1000 or so real watts per channel or 500 watts per driver, which is a good number for this driver in a 3-4 cubic foot enclosure.
so, breaking it down, for $99 for the driver, $100 for ~500 watts per 1/2 channel (or $125 if you get the amp with dsp which i recommend), and add enclosure either diy or erich's flat packs, i'm not sure there is a better deal going. one per corner would be great for most folks and two per corner is getting into insane territory.