Newb enclosure build help - AVS Forum
Forum Jump: 
Thread Tools
Old 01-13-2013, 02:41 PM - Thread Starter
Blackls1z's Avatar
Join Date: Nov 2005
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
I have an elemental design 13kv.2 kicking around. I'm looking to start the build but need assistance with what size enclosure. Specs are as follows:


Qts: .31
Qes: .35
Qms: 3.33
Fs: 21.50Hz
Re: 3.7
Vas: 162L
Mms: 142.0g
Bl: 15.00T*m
SPL: 88.47dB
Sd: 545cm²
Xmax: 15.1mm
Voice Coil: 50.0mm

Magnet Width: 5.700"
Cutout Diameter: 11.000"
Mounting Depth: 5.750"
Weight: 14lb
Total Height: 6.250"
Displacement: .06 ft³
Outside Diameter: 12.375"

Watch movies about 75% of the time and listen to music the rest. Looking for some nice low end for movies yet still have decent punch for music. Any suggestions would be much appreciated. Thanks!
Blackls1z is offline  
Sponsored Links
Old 01-13-2013, 04:23 PM
AVS Special Member
Jay1's Avatar
Join Date: Aug 2002
Location: West Valley, AZ
Posts: 4,211
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked: 138
Not sure how accurate those specs are, as ED was known for being pretty far off... A 4 ft3 box, with a 4" x 17" port (21 hz tune) should work well with a 300 watt amp. A 20" x 20" x 24" box would get you the needed volume, and allow for some bracing.


Jay1 is offline  
Thread Tools

Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off