Can someone help me model this driver in WinISD? - AVS Forum
Forum Jump: 
Thread Tools
post #1 of 2 Old Today, 05:20 PM - Thread Starter
Senior Member
likemovies's Avatar
Join Date: Nov 2009
Location: Atlanta, GA.
Posts: 260
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked: 13
Can someone help me model this driver in WinISD?

It is the MTX Audio 5515-44. When I modeled it I had it tuned to 2ft^3, 25Hz, round port of 3.23 and a vent length of 15.23.

For signal I put 200.

I get a rear port velocity right at 20 when the sub hits 20Hz (15 at 25Hz). I am at 95db at 20Hz.

I'm really just looking to see if I'm doing something wrong. To my untrained eye it looks pretty good. I found the driver on craigslist, so I thought I'd look it up and model it.

The manual says to use a 2.48ft^3 vented enclosure, but that is too high velocity, and I'm guessing it doesn't matter because that's for a car.

Thanks for any help.

I know it is for a car, but if the numbers look good, what does it matter?
What am I overlooking?

Attached is the .wdr file for anyone that desires to help. It has the extension .txt, so the extension needs to be changed.
Attached Files
File Type: txt MTX-Audio-5515-44.txt (849 Bytes, 0 views)

Samsung 51" PN51E450A, Pioneer VSX-918V, Polk Tsi300, Polk CS 2 series ii center, gonna get a day.
likemovies is online now  
Sponsored Links
post #2 of 2 Old Today, 05:25 PM
AVS Special Member
Jay1's Avatar
Join Date: Aug 2002
Location: AZ
Posts: 4,038
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Liked: 112
I havent modeled it but considering the Vas is over 6 ft3 and the Qts is .79 I seriously doubt it looks very good in 2 ft3 25hz box
Jay1 is online now  
Reply DIY Speakers and Subs

Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off