RJ45-DB9 - Control4 HC300 - JVC DLA RS10 - AVS Forum
Forum Jump: 
 
Thread Tools
post #1 of 2 Old 05-15-2009, 06:15 AM - Thread Starter
Newbie
 
daltonbly's Avatar
 
Join Date: Jul 2008
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Hello,

I have a Control4 HC 300 that I would like to connect to an overhead JVC RS 10 unit for the purpose of serial control. My first question is regarding the CAT5/6 serial adaptor to DB9. I understand at most, only 4 of the 8 wires are needed. Is it a matter of simply making sure that pin1 on the HC300 side goes to pin1 on the RS 10 side, pin2 to pin2.. etc or does someone have a pinout that shows which pin number connects to which pin number?

Once I know the serial connection is set, has anyone tried the RS1 driver with the RS 10 or does anyone have an RS 10 driver for their control4 system?

Thank you for any assistance
daltonbly is offline  
Sponsored Links
Advertisement
 
post #2 of 2 Old 05-16-2009, 03:50 PM
Newbie
 
mcotton's Avatar
 
Join Date: Dec 2007
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Typically you only need three wires for serial control (without handshaking). On the DB9 connection it is pin 5 for GND, Pin 2 for TX and Pin 3 for RX.
mcotton is offline  
Reply Home Automation

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off