vizio xvt553sv need to warm up to stay on. - AVS | Home Theater Discussions And Reviews

AVS | Home Theater Discussions And Reviews > Display Devices > LCD Flat Panel Displays > vizio xvt553sv need to warm up to stay on.

LCD Flat Panel Displays

bigrick7's Avatar bigrick7
11:59 AM Liked: 10
post #1 of 4
01-07-2013 | Posts: 2
Joined: Jan 2013
My Vizio XVT553sv suffered a power surge it would not turn on at all. I changed the power supply board and the motherboard. the TV does turn on at first with freezing video and sometimes the sound goes out . after about 1 or 2 minutes it turns back off the Vizio logo blinks. then tv turns back on again every so often it does this process twice. after cycling like this it usually stays on until turned off. what I do now is turn on the TV without a video source turned on for about 5 minutes then I turn on the video source the TV works good after doing this. I'm guessing one of the boards has a problem any help would be appreciated. thank you in advance.
videobruce's Avatar videobruce
05:21 AM Liked: 179
post #2 of 4
01-08-2013 | Posts: 15,586
Joined: Dec 2002
1. Where did you get the boards from?
2. Do you have a Service Manual?
bigrick7's Avatar bigrick7
10:51 AM Liked: 10
post #3 of 4
01-08-2013 | Posts: 2
Joined: Jan 2013
I purchased the boards from an ebay seller that sells boards on a regular basis. also no i don't have the service manual.
videobruce's Avatar videobruce
10:56 AM Liked: 179
post #4 of 4
01-08-2013 | Posts: 15,586
Joined: Dec 2002
I would ask him if he can get a manual for you unless you can do so from Vizio. I wouldn't work on anything as this w/o a manual.
Reply LCD Flat Panel Displays

Subscribe to this Thread

Powered by vBadvanced CMPS v3.2.3