~Official Olevia 747i/742i owners thread - Page 170 - AVS Forum

AVS Forum > Display Devices > LCD Flat Panel Displays > ~Official Olevia 747i/742i owners thread

LCD Flat Panel Displays

Christopher Costa
07:42 PM Liked: 0
post #5071 of 5095
06-23-2014 | Posts: 2
Joined: Jun 2014
I'm having green and pink squares within a minute or two after turning it on. Not sure if I need a firmware update or what not. Can anyone help me out please. Can anyone give me the latest firmware update or info please?!?! Anything helps. Thanks

Chris
Christopher Costa
07:45 PM Liked: 0
post #5072 of 5095
06-23-2014 | Posts: 2
Joined: Jun 2014
I need a Firmware update for my 747i please! Thanks

Chris
CombatTom's Avatar CombatTom
07:07 AM Liked: 10
post #5073 of 5095
06-24-2014 | Posts: 2
Joined: Jun 2012
Use at your own risk; follow the instructions in the manual for installing. This is version 63.7.5, which, as of a couple years ago, was the latest version (but it was old even then).

https://dl.dropboxusercontent.com/u/...47_V63.7.5.zip
seeme07
09:45 PM Liked: 0
post #5074 of 5095
07-09-2014 | Posts: 1
Joined: Jul 2014
I'm new on here. I don't know if this thread is still alive. But I've been having troubles with my 747-B11. Turn it on might have sound for hours or just mins. Turn off back on same thing most likely just mins. "When it does work it's only playing out of one speaker." I've never done a firmware... Idk if that'll help? But I love this TV and don't want to trash it. SO PLEASE HELP!!! Thanks in advance!
rarjar's Avatar rarjar
12:18 PM Liked: 12
post #5075 of 5095
07-10-2014 | Posts: 199
Joined: Feb 2007
Doubt firmware update will fix your problem, but it sounds like you have little to lose. Latest firmware link is a couple posts up!
dfs88801's Avatar dfs88801
06:54 AM Liked: 11
post #5076 of 5095
07-11-2014 | Posts: 77
Joined: May 2014

Registered DP 1.2a compatible screen
How is that possible?
Standard DP 1.2a emerged after Screen production

http://www.anandtech.com/show/8008/v...s-move-forward

Has anyone checked that?
jmeltzer's Avatar jmeltzer
08:58 PM Liked: 0
post #5077 of 5095
07-25-2014 | Posts: 2
Joined: Mar 2011
Hi everyone,

I've had my Olevia 747i since 2007 and it is still working nearly flawlessly. My issue is, HDMI seems to have audio dropouts on PS4 and the only way to fix it is to unplug the hdmi cable and reconnect it.

I am attempting to update the firmware from 747-B11_v63.7A17 to 747_V63.7.5, but I am getting no where. The TV goes through the install and says no update needed. Do I have the most current firmware for this TV? Thanks in advance.
rarjar's Avatar rarjar
11:37 AM Liked: 12
post #5078 of 5095
07-28-2014 | Posts: 199
Joined: Feb 2007
Quote:
Originally Posted by jmeltzer View Post
Hi everyone,

I've had my Olevia 747i since 2007 and it is still working nearly flawlessly. My issue is, HDMI seems to have audio dropouts on PS4 and the only way to fix it is to unplug the hdmi cable and reconnect it.

I am attempting to update the firmware from 747-B11_v63.7A17 to 747_V63.7.5, but I am getting no where. The TV goes through the install and says no update needed. Do I have the most current firmware for this TV? Thanks in advance.
It is my understanding that the firmware update will only update what needs to be updated. Assuming you are attempting to use Firmware Version 63.7.5 (the latest and last firmware update), if it shows "no update needed," then you have the latest firmware installed.
jmeltzer's Avatar jmeltzer
11:56 AM Liked: 0
post #5079 of 5095
07-28-2014 | Posts: 2
Joined: Mar 2011
Quote:
Originally Posted by rarjar View Post
It is my understanding that the firmware update will only update what needs to be updated. Assuming you are attempting to use Firmware Version 63.7.5 (the latest and last firmware update), if it shows "no update needed," then you have the latest firmware installed.
Fair enough. Do you think it would be beneficial to reset to factory defaults or format the C or D drives through the Service Menu and re-installing the latest firmware? Or do you think it could just be the HDMI chip starting to go. Basically, it seems to happen when a device goes into standby through power save settings. If not, I'll just live with the occasional unplug/replug of HDMI cables.

Thanks for the reply either way Rarjar.
rarjar's Avatar rarjar
11:59 AM Liked: 12
post #5080 of 5095
07-28-2014 | Posts: 199
Joined: Feb 2007
Quote:
Originally Posted by jmeltzer View Post
Fair enough. Do you think it would be beneficial to reset to factory defaults or format the C or D drives through the Service Menu and re-installing the latest firmware? Or do you think it could just be the HDMI chip starting to go. Basically, it seems to happen when a device goes into standby through power save settings. If not, I'll just live with the occasional unplug/replug of HDMI cables.

Thanks for the reply either way Rarjar.
I have no idea about resetting to factory resets, however, I have a similar HDMI problem with an LG LED TV and LG advised me that a hard reset will often fix HDMI pairing issues, so on that basis, I think I would try the hard reset first.
gburfoot's Avatar gburfoot
06:06 PM Liked: 10
post #5081 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
do you have the update program please have firmware thank you not install please help have 265 board have 747 tv please help tried for months any ideas how
gburfoot's Avatar gburfoot
06:19 PM Liked: 10
post #5082 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
Quote:
Originally Posted by gburfoot View Post
do you have the update program please have firmware thank you not install please help have 265 board have 747 tv please help tried for months any ideas how
do you have the update program please have firmware thank you not install please help have 265 board have 747 tv please help tried for months any ideas how @zoomin ternet.net
gburfoot's Avatar gburfoot
06:29 PM Liked: 10
post #5083 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
thank you
gburfoot's Avatar gburfoot
06:30 PM Liked: 10
post #5084 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
thank you again
gburfoot's Avatar gburfoot
06:30 PM Liked: 10
post #5085 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
just want to pm
gburfoot's Avatar gburfoot
06:31 PM Liked: 10
post #5086 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
just want to pm help please
gburfoot's Avatar gburfoot
06:32 PM Liked: 10
post #5087 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
just want to pm help please rarjar
gburfoot's Avatar gburfoot
06:33 PM Liked: 10
post #5088 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
just want to pm help please anyone else need help dont know what to post
gburfoot's Avatar gburfoot
06:38 PM Liked: 10
post #5089 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
can't up load firmware have no clue please help is there another program
gburfoot's Avatar gburfoot
07:24 PM Liked: 10
post #5090 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
Quote:
Originally Posted by rarjar View Post
Doubt firmware update will fix your problem, but it sounds like you have little to lose. Latest firmware link is a couple posts up!
please help with how to do and what i need 265 board 747 tv you sent bios but what else pullng hair help please you tell me list my email i will help other with same instructions and programs programs thank you again.


Garth
gburfoot's Avatar gburfoot
07:27 PM Liked: 10
post #5091 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
Quote:
Originally Posted by rarjar View Post
It is my understanding that the firmware update will only update what needs to be updated. Assuming you are attempting to use Firmware Version 63.7.5 (the latest and last firmware update), if it shows "no update needed," then you have the latest firmware installed.
please help with how to do and what i need 265 board 747 tv you sent bios but what else pullng hair help please you tell me list my email i will help other with same instructions and programs programs thank you again.


Garth
gburfoot's Avatar gburfoot
07:35 PM Liked: 10
post #5092 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
Quote:
Originally Posted by jmeltzer View Post
Hi everyone,

I've had my Olevia 747i since 2007 and it is still working nearly flawlessly. My issue is, HDMI seems to have audio dropouts on PS4 and the only way to fix it is to unplug the hdmi cable and reconnect it.

I am attempting to update the firmware from 747-B11_v63.7A17 to 747_V63.7.5, but I am getting no where. The TV goes through the install and says no update needed. Do I have the most current firmware for this TV? Thanks in advance.
do you have firmware up date soft ware Gfaivre&zoominternet.net
gburfoot's Avatar gburfoot
07:40 PM Liked: 10
post #5093 of 5095
09-15-2014 | Posts: 15
Joined: Dec 2013
Quote:
Originally Posted by rarjar View Post
Doubt firmware update will fix your problem, but it sounds like you have little to lose. Latest firmware link is a couple posts up!
please help with how to do and what i need 265 board 747 tv you sent bios but but need update software please help w gfaivre$zoominternet.net


Garth
rarjar's Avatar rarjar
02:57 PM Liked: 12
post #5094 of 5095
09-22-2014 | Posts: 199
Joined: Feb 2007
Garth, I sent you the latest firmware and instructions on how to update...or at least I think I did assuming your email is gfaivre@zoominternet.net
rarjar's Avatar rarjar
11:23 AM Liked: 12
post #5095 of 5095
11-26-2014 | Posts: 199
Joined: Feb 2007
Quote:
Originally Posted by Christopher Costa View Post
I'm having green and pink squares within a minute or two after turning it on. Not sure if I need a firmware update or what not. Can anyone help me out please. Can anyone give me the latest firmware update or info please?!?! Anything helps. Thanks

Chris
Chris, I doubt if it will help, but if you'll PM me your email, I'll send you the latest firmware. Instructions for updating are contained in post #5028 by S!TH!NATOR a few pages back.
Tags: Olevia

Reply LCD Flat Panel Displays

Subscribe to this Thread

Powered by vBadvanced CMPS v3.2.3