Panasonic TC-P58S1 Need some help figuring out this power on issue Im having.................... - AVS Forum
Forum Jump: 
 
Thread Tools
post #1 of 5 Old 11-29-2012, 09:36 PM - Thread Starter
Newbie
 
Johnny-5's Avatar
 
Join Date: Dec 2010
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Ive read up on this but cant find any resolution on the issue and also mine seems to be acting a little different than what Im reading. So any help would be greatly appriciated!

Anyways when I power the TV on after it being off for an hour or longer, over night, etc I can hear the TV click, fans kick on and than I hear another click and the red power light would blink 7 times. Ive found this from searching:

7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

When I power on the TV the second time the TV works flawless with no issues. Ive even turned it off for about 30+ minutes and powered the TV on again and it starts with no issues. Its only when the TV has been sitting for a few hours is when it wont power on as normal.

Does anyone know what the issue could be? Is this something I can replace myself or should it be done by a professional. TV is about 3 years old and bought new and I believe my warrany expired a few months back. Figures its always something that goes bad after the warranty expires if feels like.

Thanks in advance,
Johnny
Johnny-5 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 Old 11-30-2012, 08:39 AM
AVS Special Member
 
mailiang's Avatar
 
Join Date: Jan 2005
Location: Springsteen Country
Posts: 6,532
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 61 Post(s)
Liked: 276
Sounds like a capacitor issue with that board. You will probably need to replace it.



Ian

The best way to succeed in life is to act on the advice you give to others

mailiang is offline  
post #3 of 5 Old 11-30-2012, 03:58 PM - Thread Starter
Newbie
 
Johnny-5's Avatar
 
Join Date: Dec 2010
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by mailiang View Post

Sounds like a capacitor issue with that board. You will probably need to replace it.
Ian

The error I got was that though? But do you know where that capacitor would be located and what part, diy instructions? Anything like that would be great.
Johnny-5 is offline  
post #4 of 5 Old 11-30-2012, 08:50 PM
AVS Special Member
 
mailiang's Avatar
 
Join Date: Jan 2005
Location: Springsteen Country
Posts: 6,532
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 61 Post(s)
Liked: 276
Quote:
Originally Posted by Johnny-5 View Post

The error I got was that though? But do you know where that capacitor would be located and what part, diy instructions? Anything like that would be great.

The caps are on the boards. You will have to replace the board(s). See link:

http://www.scribd.com/doc/15964494/Plasma-Symptoms-and-Cures



Ian

The best way to succeed in life is to act on the advice you give to others

mailiang is offline  
post #5 of 5 Old 12-01-2012, 10:48 PM - Thread Starter
Newbie
 
Johnny-5's Avatar
 
Join Date: Dec 2010
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by mailiang View Post

The caps are on the boards. You will have to replace the board(s). See link:
http://www.scribd.com/doc/15964494/Plasma-Symptoms-and-Cures
Ian

Ian thank you for the link. Ill go through it and see if that will help me figure out the issue.
Johnny-5 is offline  
Reply Plasma Flat Panel Displays

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off