Official Samsung PNxxF8500 Owners Thread (No Street Price Talk) - AVS Forum

AVS Forum > Display Devices > Plasma Flat Panel Displays > Official Samsung PNxxF8500 Owners Thread (No Street Price Talk)

Plasma Flat Panel Displays

ljmart's Avatar ljmart
12:53 PM Liked: 183
post #1 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
********* 2013 KING OF HDTVs *********

edit: the first few posts will be updated as needed so please check back for new settings, info, etc...

*Please be respectful and keep this thread to the discussion of this set only. TY*
ljmart's Avatar ljmart
12:54 PM Liked: 183
post #2 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
VARIOUS SETTINGS INFO.



a big THANK YOU for those sharing their hard work!

note that each set is individual and varies...plugging in someone else's settings may not produce good results.

user calibrated settings can be found at.... (will update this list as needed) (please also note the settings were all done at various times, with various firmware updates.)

Link to "F8500 recommended settings thread"
http://www.avsforum.com/t/1467675/f8...ettings-thread
(post numbers are for this thread unless otherwise noted and linked)


pieandchips..............51" (post 176..with revisions found in signature area of his most recent posts)
remush....................51" (post 68)
glenee......................51" (post 1418)


griffithstrife...............60" (post 305, 1042)
philwojo....................60" (post 958)


mightymouseusf........64" (post 20)
elvamir.....................64" (post 425, 679, 691)
shpankey..................64" (post 693)
ola67........................64" (post 1078)
wantsnwarrants.........64" (spreadsheet of various users) http://andthatsjazz.org/RecommendedSettings.html
davec56....................64" (post 1132)
ronald epstein............64" (post 3135 owners thread) http://www.avsforum.com/t/1475066/of...#post_24213303
wxman......................64" (post 1712)
p5browne..................64" (post 2031 settings thread) & (post 5197 owners thread) http://www.avsforum.com/t/1475066/of...#post_24541508


http://www.tweaktv.com/in-dspth-hdtv...00-plasma.html
ljmart's Avatar ljmart
12:54 PM Liked: 183
post #4 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
TIPS, TRICKS, AND OTHER USEFUL STUFF.



Initial Break In With Out Slides: opinions vary on this so this is just what i did for the first 200 or so hours...

besides varying content/changed channels every hour or so, no channels with tickers across bottom, mixed in some full screen blurays, when viewing cable channels i used screen fit (sometimes zoom1 so logo would be mostly off screen) leaving NO black bars. zoom2 (while sleeping) so no logo on screen and on a channel that runs continuous shows, no infomercials. (hbo, cartoon network, are good) settings i used: cell light 15, contrast 65, brightness 45. also when runnung tv while sleeping: cell 12, contrast 55, brightness 40.

although, i will say, i think this is probably overkill. its just that this was my first plasma and i felt better doing this initial routine. would i be this cautious again? probably not!
just enjoy your beautiful new set


~~~a few members PHOTOS~~~

Official Samsung PNxxF8500 Series Discussion Thread [No Street Price Talk] (posts 3028, 3030)

Official Samsung PNxxF8500 Series Discussion Thread [No Street Price Talk] (posts 3450, 3451, 3452)

Official Samsung PNxxF8500 Series Discussion Thread [No Street Price Talk] (posts 3505, 3518, 3522)



***OTHER USEFUL THREADS AND GENERAL INFO***

---2014--03-09: CINEMA SMOOTH and FILM MODE and Firmware Update info
F8500 Recommended Settings Thread..... .post 1922

F8500 Recommended Settings Thread..... .post 1912


---2014--01-30: newly found Bug in firmware 1117...'Bugs thread'
http://www.avsforum.com/t/1515070/of...gs-thread/0_20


---2013--12-20: factory reset instructions
Official Samsung PNxxF8500 Owners Thread (No Street Price Talk) .post 2481


---previous thread
http://www.avsforum.com/t/1463454/of...rice-talk/0_20


---if you are experiencing a 'dim' look to your set, try this eco bug trick. credited to member 'floridaman'
Under 'system', then 'eco solution', then 'eco sensor', turn the eco sensor 'on.' then adjust the 'minimum cell light' to 20. and then finally go back and turn the eco sensor back to 'off.' exit menus. you should notice a major difference in the brightness.
note to newer owners... this was a bug in the initial production runs. by now, 2014, you may not have this issue.

---see post #6 for direct link to samsung site for owners manual and firmware updates.
ljmart's Avatar ljmart
12:54 PM Liked: 183
post #5 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
********* NEW AS OF 7-18-13 *********


USA customers only, samsung is now offering the standard remote at no cost.

https://support-us.samsung.com/cyber...mote/index.jsp

http://www.samsungsupport.com/remote

〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰〰 〰〰〰〰〰〰〰
Quote:Originally Posted by p5browne 

Need a PB Remote (Especially Canadians, where Samsung isn't so generous about sending the PB Remote Free, as in the US), as a secondary to the Touch Remote. Or, as a backup, and don't need the Amazon and NetFlix PBs. A nice inexpensive alternative can be gotten at Amazon:

http://www.amazon.com/General-Control-Samsung-AA59-00784A-AA59-00621A/dp/B00HD3115A/ref=sr_1_1?ie=UTF8&qid=1399821345&sr=8-1&keywords=AA59-00784A+AA59-00621A


THANK YOU p5browne! also might want to check out eBay for this....
Ph8te's Avatar Ph8te
01:06 PM Liked: 631
post #6 of 10023
05-30-2013 | Posts: 10,211
Joined: Oct 2005
I would add links to the following threads:
Settings
http://www.avsforum.com/t/1467675/f8500-recommended-settings-thread

Previous Thread:
http://www.avsforum.com/t/1463454/official-samsung-pnxxf8500-series-discussion-thread-no-street-price-talk

Samsubg Support Site (Where firmware can be downloaded):
http://www.samsung.com/us/support/owners/product/PN64F8500AFXZA

Manual:
http://downloadcenter.samsung.com/content/UM/201304/20130411175036781/[ENG_US]FP9ATSCF-2.105.pdf

Also links to any reviews....

I also made a suggestign of editing the title, to add "No Street Price Talk" so taht deal talk gets saved for the deal forum.....

Not an owner but think the above would be helpful,please excuse if I ahve over stepped.
ljmart's Avatar ljmart
01:14 PM Liked: 183
post #7 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
absolutely not! your thoughts and help are ALWAYS welcome! thanks so much for adding links above smile.gif
Halimali's Avatar Halimali
01:42 PM Liked: 50
post #8 of 10023
05-30-2013 | Posts: 555
Joined: Mar 2013
Thanks to F8500 I see many first time plasma owners in this thread. That itself says a lot about the potential of this TV and the plasma technology. I feel Samsung should keep producing plasmas for some more time. With F8500 Samsung is moving in the right direction. Making another version next year with even better PQ would be fantastic
coresare's Avatar coresare
01:44 PM Liked: 20
post #9 of 10023
05-30-2013 | Posts: 298
Joined: Feb 2013
Owner in on first page!
ljmart's Avatar ljmart
01:45 PM Liked: 183
post #10 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by Halimali View Post

Thanks to F8500 I see many first time plasma owners in this thread. That itself says a lot about the potential of this TV and the plasma technology. I feel Samsung should keep producing plasmas for some more time. With F8500 Samsung is moving in the right direction. Making another version next year with even better PQ would be fantastic

indeed hali, its a game changer for sure!
ljmart's Avatar ljmart
01:47 PM Liked: 183
post #11 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by coresare View Post

Owner in on first page!

the race is on biggrin.gif
philwojo's Avatar philwojo
02:20 PM Liked: 18
post #12 of 10023
05-30-2013 | Posts: 63
Joined: Jul 2002
Well not an official owner yet, but I just heard that my break-in period is going on and my unit should ship on the 7th and be to me in 2 business days. So early June I will have it in my house and I can't wait!!

I look forward to more great posts in this thread.

phil
Bama29's Avatar Bama29
02:31 PM Liked: 19
post #13 of 10023
05-30-2013 | Posts: 805
Joined: Jan 2009
I am very glad to see this thread get started!

I am a happy new owner of the PN64F8500! I am coming from a Full array local dimming Toshiba Regza that had really nice blacks but quite a bit of blooming. This is my first Plasma so I am definitely in learning mode here.

I have been happily surprised at the picture quality, definition, shadow detail, skin tones, and whites. I pulled out Avatar 3D to give the 3D performance a test and was very pleased. My only previous experience with 3D on a TV was with a passive 3D set. The active image quality had loads of resolution. A very nice experience indeed.

After I get enough hours, I plan on dusting off the old Chroma 5 & i1one pro meters and giving a go at calibration. To my eye, the Movie mode in particular looks very close out of the box, to what it should be.

Thanks ljmart for getting this Owners Thread going. smile.gif
DanF8500's Avatar DanF8500
02:32 PM Liked: 222
post #14 of 10023
05-30-2013 | Posts: 1,379
Joined: Apr 2013
Okay, I'm game for an 8500 owner's thread. I've been an owner for close to 2 months. Love the tv (a 51"). Ph8te, you're more than welcome to contribute anyway you can to this thread. You've been very helpful on the other 8500 thread as long as I've been active on it. Maybe one day you'll be an 8500 owner??
Bama29's Avatar Bama29
02:40 PM Liked: 19
post #15 of 10023
05-30-2013 | Posts: 805
Joined: Jan 2009
Since I am a new Plasma owner and somewhat clueless on the tech at this point I have a question. Is there a particular advantage in viewing during break in with picture size at "16:9" rather than "screen fit" so that the pixel orbiter is engaged?


Michael
ljmart's Avatar ljmart
02:49 PM Liked: 183
post #16 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by philwojo View Post

Well not an official owner yet, but I just heard that my break-in period is going on and my unit should ship on the 7th and be to me in 2 business days. So early June I will have it in my house and I can't wait!!

I look forward to more great posts in this thread.

phil

ooooh the anticipation! congrats, i think you will be impressed. and thanks for contributing smile.gif
caeguy's Avatar caeguy
02:49 PM Liked: 17
post #17 of 10023
05-30-2013 | Posts: 1,246
Joined: Apr 2004
Just upgraded to 1104 from 1103. During the process, I got the "Optimizing System" message. So far, no change noticed.
ljmart's Avatar ljmart
02:52 PM Liked: 183
post #18 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by Bama29 View Post

Since I am a new Plasma owner and somewhat clueless on the tech at this point I have a question. Is there a particular advantage in viewing during break in with picture size at "16:9" rather than "screen fit" so that the pixel orbiter is engaged?


Michael

i used zoom1 so there wouldnt be any black bars AND pixel orbiter could be used.
Ph8te's Avatar Ph8te
02:56 PM Liked: 631
post #19 of 10023
05-30-2013 | Posts: 10,211
Joined: Oct 2005
Quote:
Originally Posted by Bama29 View Post

Since I am a new Plasma owner and somewhat clueless on the tech at this point I have a question. Is there a particular advantage in viewing during break in with picture size at "16:9" rather than "screen fit" so that the pixel orbiter is engaged?


Michael

Pixel orbiter is mostly mumbo jumbo.....Screen fit is the proper setting to watch TV in, during the break in period jsut watch a wide varit of programing and youll do OK. I would also avoid long periods (hours on end) of static images (TV "bugs", letterboz material, gaming).....
Bama29's Avatar Bama29
02:57 PM Liked: 19
post #20 of 10023
05-30-2013 | Posts: 805
Joined: Jan 2009
Thanks will add that to my list when watching something in SD.

Michael
Bama29's Avatar Bama29
02:58 PM Liked: 19
post #21 of 10023
05-30-2013 | Posts: 805
Joined: Jan 2009
Quote:
Originally Posted by Ph8te View Post

Pixel orbiter is mostly mumbo jumbo.....Screen fit is the proper setting to watch TV in, during the break in period jsut watch a wide varit of programing and youll do OK. I would also avoid long periods (hours on end) of static images (TV "bugs", letterboz material, gaming).....

Good to know. I would rather view in Screen fit.

Michael
ljmart's Avatar ljmart
03:00 PM Liked: 183
post #22 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by Bama29 View Post

I am very glad to see this thread get started!

I am a happy new owner of the PN64F8500! I am coming from a Full array local dimming Toshiba Regza that had really nice blacks but quite a bit of blooming. This is my first Plasma so I am definitely in learning mode here.

I have been happily surprised at the picture quality, definition, shadow detail, skin tones, and whites. I pulled out Avatar 3D to give the 3D performance a test and was very pleased. My only previous experience with 3D on a TV was with a passive 3D set. The active image quality had loads of resolution. A very nice experience indeed.

After I get enough hours, I plan on dusting off the old Chroma 5 & i1one pro meters and giving a go at calibration. To my eye, the Movie mode in particular looks very close out of the box, to what it should be.

Thanks ljmart for getting this Owners Thread going. smile.gif

thanks bama smile.gif glad to see ya here and thanks for contributing! this is (essentially) my first plasma also. not counting the two months i had an e7000... it definitely makes tv watching a 'new' experience!
ljmart's Avatar ljmart
03:02 PM Liked: 183
post #23 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by Bama29 View Post

Good to know. I would rather view in Screen fit.

Michael

agree with ph8, screen fit is ideal and orbiter really doesnt help much. zoom just suggestion if you wanted to run orbiter
ljmart's Avatar ljmart
03:05 PM Liked: 183
post #24 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by DanF8500 View Post

Okay, I'm game for an 8500 owner's thread. I've been an owner for close to 2 months. Love the tv (a 51"). Ph8te, you're more than welcome to contribute anyway you can to this thread. You've been very helpful on the other 8500 thread as long as I've been active on it. Maybe one day you'll be an 8500 owner??

thanks dan! another one of the f8500 pioneers! ive had mine two months saturday
ljmart's Avatar ljmart
03:08 PM Liked: 183
post #25 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by caeguy View Post

Just upgraded to 1104 from 1103. During the process, I got the "Optimizing System" message. So far, no change noticed.

good to know... im updating later tonight. sure would be nice to know Exactly what this update really does!!
Bama29's Avatar Bama29
03:09 PM Liked: 19
post #26 of 10023
05-30-2013 | Posts: 805
Joined: Jan 2009
Quote:
Originally Posted by ljmart View Post

agree with ph8, screen fit is ideal and orbiter really doesnt help much. zoom just suggestion if you wanted to run orbiter

Our local Cable provider is not a "National" company and so far the HD content is rather limited, so I will use your zoom suggestion when I need to watch something that is in standard Def. Our local CBS affiliate broadcasts with a single line of white pixels showing vertically on the extreme left side of the screen. On that particular channel I will probably have to use 16:9. Other than that, Screen Fit all the way.
Bigham16's Avatar Bigham16
03:10 PM Liked: 50
post #27 of 10023
05-30-2013 | Posts: 596
Joined: Jul 2008
Just purchased the 64F8500 last week!! I'm coming from a 64D8000 and what a difference two years makes!!! Fantastic TV!!

I am using Elvamir settings and looks great!!
arenaman's Avatar arenaman
03:27 PM Liked: 32
post #28 of 10023
05-30-2013 | Posts: 451
Joined: Feb 2012
OK, count me in too smile.gif
ljmart's Avatar ljmart
03:30 PM Liked: 183
post #29 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by Bigham16 View Post

Just purchased the 64F8500 last week!! I'm coming from a 64D8000 and what a difference two years makes!!! Fantastic TV!!

I am using Elvamir settings and looks great!!

how sweet it is! welcome to the club smile.gif
ljmart's Avatar ljmart
03:31 PM Liked: 183
post #30 of 10023
05-30-2013 | Posts: 1,096
Joined: Feb 2013
Quote:
Originally Posted by arenaman View Post

OK, count me in too smile.gif

cool smile.gif glad to see ya on board!
Tags: Samsung Pn51f8500 51 Inch 3d Smart Plasma Hdtv , Samsung Pn60f8500 60 Inch 1080p 600hz 3d Smart Plasma Hdtv , Samsung Pn64f8500 64 Inch 3d Smart Plasma Hdtv

Gear in this thread
Reply Plasma Flat Panel Displays

Subscribe to this Thread

Powered by vBadvanced CMPS v3.2.3