Here is the message that I sent to Dennis. Keep in mind that some of the surrounds will just be prewired and will be added with time.
Ok, the theater will need three rows of seating on risers. The ceiling is 10' and the green line around the perimeter and across the room for hush box is 16". The speakers are JTR triple 8s for LCR and slanted 8's/single 8's. I already have the LCR but am waiting to order the other 12 slanted8's/single 8's until I know what the design would recommend. The IB wall will house the LCR, multiple IB 18s will be around the LCRs either 12 or 16, and the two front loaded 21" Mal x's will be firing through the IB wall and the false screen wall. I will need the placement of the LCR, surrounds, heights, rear surrounds, and width speakers. I understand these speakers don't have polar plots and some of the other specs but as long as they are reasonably placed it will be fine. As far as the FLHs I think the attachments should show enough that you can understand how they will go through both walls on the stage. They are 4' exactly from rear to the edge of the mouth. If you would like another drawing that wont be a problem.
Projector-updated! Sony 1000es
Screen edit updated - Seymour Center StageXD 16:9 updated: 13' wide stewart ultramatte 150 microperf
Speakers-JTR Triple 8s, and mix between slanted and single 8's. 15 total
Subs-Too many. updated 10 sealed 21s
Amps- 1 QSC RMX 2450 for surrounds at 3/channel. 3 RMX 1850HD for rear, height, and width. 2 QSC PLX 3602 for LCR. 1 QSC RMX 4050 for IB subs. 1 QSC RMX 4050 for FLHs.
EQ and Sub management- still debating
Lighting- I have some drawings but nothing set in stone yet. Thinking about grafik eye linked to irule app on ipad.
If I forgot anything just let me know either by phone or email.