Living the dream - Upstairs Theater build - Page 7 - AVS Forum
Forum Jump: 
 7Likes
Reply
 
Thread Tools
post #181 of 347 Old 07-02-2013, 10:27 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
All, I'm not ready for it yet but thinking I might need to take advantage of the July 4th "deals". I don't know my exact color scheme yet but I'm thinking my walls will be some shade of burgundy and my ceiling will either be gray or black. My question is should I go ahead and get a 5 gallon bucket of grey tinted primer at least as I know I'll need that? Also, has anyone out there used the CREE LR6 LEDs and painted them? The housing/trim ring is all made into the LED driver so it will be a pain to paint but I'm thinking it should be possible. Reason I ask is I already have those I plan on using and can't return them. Also, if I go black or dark grey should I paint only the inside section of the soffit on the vertical side and the part of the ceiling inside of the soffit the darker color and paint the bottom of the soffit the wall color? I know it's all in what looks good but I have a tough time visualizing some of this. I'm debating about going ahead and buying my drywall during the "sale" also.
wraunch is offline  
Sponsored Links
Advertisement
 
post #182 of 347 Old 07-02-2013, 10:47 AM
Scott Horton, techht.com
 
GetGray's Avatar
 
Join Date: Aug 2004
Location: Mid-South USA
Posts: 5,445
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Liked: 51
Check with the local drywall supply houses before buying at a big box store. They typically deliver inside for free or a minimum charge, and are cheaper than big box stores at the same time.

re the LED's Mario used the Home depot Cree LEDs with built in trim ring. I looked at them, they ahve good color temperature, possibly the best of any LED I tested. However they have a 180 degree diffuse beam pattern, I didn' tliek it for home theater. personally I wanted more defined beam spread to keep light focused and off the screen.
GetGray is online now  
post #183 of 347 Old 07-02-2013, 01:07 PM
AVS Special Member
 
rabident's Avatar
 
Join Date: Mar 2000
Posts: 2,013
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked: 23
I would also be careful using ProjectorCentral to see if a projector is bright enough for the size screen you want. Some projectors loose almost half their brightness when calibrated for accurate colors. There was a shootout thread in the $3k projector section that showed one of the 2,000 lumen BenQ projectors at ~1150 lumens post calibration and that was with something like 50 (low) hours on the bulb. Some projectors will loose half their brightness from bulb aging (rs55 I think was bad at that). So if you're targeting 24ftL then maybe no big deal, but if you're trying to eek out 12ftL using manufacturer rated lumens (which is what PJ Central uses) then you could end up with a dim picture.

Maybe I'm preaching to the choir, but thought I should mention.

 

 

rabident is offline  
post #184 of 347 Old 07-02-2013, 05:29 PM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
That's a good point. I don't want to blow a ton of cash on the first projector for this room as I think in 2-3 yrs i'll be ready to replace it with a 4k most likely.
wraunch is offline  
post #185 of 347 Old 07-02-2013, 05:41 PM
AVS Addicted Member
 
Mfusick's Avatar
 
Join Date: Aug 2002
Location: Western MA
Posts: 22,408
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 146 Post(s)
Liked: 776
Quote:
Originally Posted by wraunch View Post

That's a good point. I don't want to blow a ton of cash on the first projector for this room as I think witching 2-3 yrs ill be ready to replace it with a 4k most likely.

I said that about my first Infocus X1 (600x800 VGA )

And also my 720p that followed.

Now you saying it about a 1080p wink.gif

-

"Too much is almost enough. Anything in life worth doing is worth overdoing. Moderation is for cowards."
Mfusick is offline  
post #186 of 347 Old 07-04-2013, 01:01 PM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Oh I'll always be looking to upgrade.
wraunch is offline  
post #187 of 347 Old 07-05-2013, 07:19 AM
AVS Club Gold
 
AV Science Sales 5's Avatar
 
Join Date: Sep 2011
Location: A beautiful view of a lake
Posts: 7,468
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 239 Post(s)
Liked: 389
Quote:
Originally Posted by wraunch View Post

I plan on using the Centerstage XD AT screen material from Seymour. They state a gain of 1.2 so with that in mind do you see a flaw in my plan of getting the Epson 8350 or something similar and mounting it at 17' with a 130" screen resulting in 11fL? Or would I be better served to do a 120" screen, mount the projector at 18'6" which would give me 13 fL?

You want to try and use your projector in best image mode. With the 8350 and a 130" diagonal 16:9 screen, expect a little under 10FL in low lamp and a little under 13FL in high lamp. In other words, that projector is not bright enough for that size screen. These numbers are with a new lamp.

Mike Garrett, AV Science Sales Call Me: 585-671-2968
Email Me: Mike@AVScience.com
Brands we sell: http://avscience.com/brands/ 
Call for B-stock projectors
Stewart, Seymour, SE, SI & many more.
Klipsch, RBH, Martin Logan, Triad, Atlantic Technology, MK Sound, BG Radia, SVS & Def Tech.
AV Science Sales 5 is offline  
post #188 of 347 Old 07-05-2013, 08:33 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
So what should I be looking at in that price range? Or is that unrealistic?
wraunch is offline  
post #189 of 347 Old 07-05-2013, 10:54 AM
AVS Addicted Member
 
Mfusick's Avatar
 
Join Date: Aug 2002
Location: Western MA
Posts: 22,408
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 146 Post(s)
Liked: 776
Quote:
Originally Posted by wraunch View Post

So what should I be looking at in that price range? Or is that unrealistic?

Optoma HD25 is 865 lumens in cinema mode and 6500k on ECO low lamp mode.

It's under $1000. 3D and 1080p.

http://www.projectorcentral.com/optoma_hd25_home_theater_projector_review.htm
Quote:
. Our test sample measured 6400K across the board with no adjustment at all and an average gamma of 2.2. At over 1100 calibrated lumens, the picture is bright enough for living room use, if desired. In a darkened theater environment, the Eco lamp setting's roughly 850 lumens is still quite bright and extends lamp life to 6,000 hours. On a 120" diagonal 1.3 gain screen, the HD25 produces an on-screen brightness of 26 foot-Lamberts in this mode.

-

"Too much is almost enough. Anything in life worth doing is worth overdoing. Moderation is for cowards."
Mfusick is offline  
post #190 of 347 Old 07-06-2013, 12:07 PM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
I haven't looked much at the Optomas. This review looks great though.
wraunch is offline  
post #191 of 347 Old 07-08-2013, 10:13 AM
AVS Special Member
 
Nethawk's Avatar
 
Join Date: Sep 2001
Posts: 2,513
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 115
Aww man, so glad I found this thread. I just hope it's not too late for you and your new home theater build. wink.gif

http://www.avsforum.com/t/36999/ac-wall-outlet-plates

biggrin.gif

Nethawk is offline  
post #192 of 347 Old 07-08-2013, 07:00 PM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Did Brian tell you about that?
wraunch is offline  
post #193 of 347 Old 07-09-2013, 06:49 AM
AVS Special Member
 
J_P_A's Avatar
 
Join Date: Dec 2008
Location: L.A. - Lower Alabama
Posts: 4,119
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 245 Post(s)
Liked: 254
Wooden outlet covers that improve sound........ I'm speechless!?! eek.gif

Dude, are you made of leprechauns? Cause that was awesome!

The Plains Theater Has Begun
J_P_A is online now  
post #194 of 347 Old 07-09-2013, 11:34 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Pretty funny stuff. Small update. I went and bought a 5 gallon bucket of grey tinted primer at HD on their 4th of July sale. Also bought a few gallons of Behr "Wine Tasting" in Eggshell for our main theater color. It's a Merlot type of color. I wanted maroon or something a little redder but the wife wanted something more wine colored to go with the black furniture and black ceiling. I was going to get some Mouse Ears for the ceiling but they had a gallon of mistint Glidden in Black - Flat for $5 that I couldn't pass up. We'll see how it goes, worst case it will be a first coat paint. Waiting on building a ladder to my attic above the room and then inspection time!
wraunch is offline  
post #195 of 347 Old 07-19-2013, 07:50 PM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Listened to some speakers today. Here a few sets of MK, Atlantic Tech and Def Tech. Up next psb, paradigm, and klipsch
wraunch is offline  
post #196 of 347 Old 07-20-2013, 04:47 AM
Scott Horton, techht.com
 
GetGray's Avatar
 
Join Date: Aug 2004
Location: Mid-South USA
Posts: 5,445
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Liked: 51
Which AT? Where? I've got a customer who wants to hear some before getting a full 7.x set. I don't have them in my demo room, trying to find someone who does.

Thanks!
GetGray is online now  
post #197 of 347 Old 07-20-2013, 11:06 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Quote:
Originally Posted by GetGray View Post

Which AT? Where? I've got a customer who wants to hear some before getting a full 7.x set. I don't have them in my demo room, trying to find someone who does.

Thanks!

AT 8200 at Intelligent Electronics in Cary Nc.
wraunch is offline  
post #198 of 347 Old 07-30-2013, 03:19 AM
Member
 
hamptonht48's Avatar
 
Join Date: Oct 2009
Location: Clayton, NC
Posts: 97
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 12
Got my AT 4400 system from there, great folks to work with!
hamptonht48 is offline  
post #199 of 347 Old 07-30-2013, 07:42 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
You have the 4400? The guy there was telling me he thought I could use the 6200. Seems pricey. Scheduled my rough-in inspection for tomorrow!!!
wraunch is offline  
post #200 of 347 Old 07-30-2013, 08:02 AM
Member
 
hamptonht48's Avatar
 
Join Date: Oct 2009
Location: Clayton, NC
Posts: 97
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 12
Awesome! Moving closer!
Yes, for me, too at the time (I see the 6200's are more, but a maybe a bit better for a larger room), and I got the SB642e sub from them, too (oh how I'd love two!). Up until then I thought $700 was an exorbitant price for my Bose Acoustimas cubes! You can also check out Audiogon. com, it's kind of an eBay for audio equipment, but higher end. I was also very interested in the Def Tech's they had at the time, but the AT's won out for my personal listening preferences.

Good luck, but don't scrimp on the speakers! And keep auditioning. Some places will let you take a demo set home to try out, but don't know if Int. Elect. will.
hamptonht48 is offline  
post #201 of 347 Old 07-30-2013, 04:40 PM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Just realized I just hit 200 posts in my thread!
wraunch is offline  
post #202 of 347 Old 07-30-2013, 05:58 PM
AVS Addicted Member
 
Mfusick's Avatar
 
Join Date: Aug 2002
Location: Western MA
Posts: 22,408
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 146 Post(s)
Liked: 776
Nice ! now it's 202 biggrin.gif

-

"Too much is almost enough. Anything in life worth doing is worth overdoing. Moderation is for cowards."
Mfusick is offline  
post #203 of 347 Old 07-31-2013, 04:07 AM
Member
 
hamptonht48's Avatar
 
Join Date: Oct 2009
Location: Clayton, NC
Posts: 97
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 12
You're welcome! smile.gif
hamptonht48 is offline  
post #204 of 347 Old 07-31-2013, 11:00 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Big update! Passed my rough-in inspection today!!!! Insulation goes in Friday!
wraunch is offline  
post #205 of 347 Old 08-03-2013, 05:00 AM
AVS Special Member
 
NicksHitachi's Avatar
 
Join Date: Jul 2007
Location: Wilmington, NC
Posts: 3,550
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 64 Post(s)
Liked: 124
".......stay on target......"
NicksHitachi is online now  
post #206 of 347 Old 08-03-2013, 06:05 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Oh I am Nick. I am really looking hard at whether or not I want to go DIY for my speakers or buy the Ascend or Chase speakers.
wraunch is offline  
post #207 of 347 Old 09-09-2013, 07:06 PM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
Time for a big update! We have drywall ladies and gents!
wraunch is offline  
post #208 of 347 Old 09-09-2013, 07:57 PM
AVS Special Member
 
Spaceman's Avatar
 
Join Date: Nov 2009
Location: North Houston
Posts: 1,964
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked: 96
That's a big step. Congrats! Room looks and feels a lot different now, doesn't it?
Spaceman is offline  
post #209 of 347 Old 09-09-2013, 08:04 PM
AVS Special Member
 
J_P_A's Avatar
 
Join Date: Dec 2008
Location: L.A. - Lower Alabama
Posts: 4,119
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 245 Post(s)
Liked: 254
Yeah.... Yeah.... That's a big step! I don't know about you, but it made my room feel much smaller!

Dude, are you made of leprechauns? Cause that was awesome!

The Plains Theater Has Begun
J_P_A is online now  
post #210 of 347 Old 09-10-2013, 08:46 AM - Thread Starter
Advanced Member
 
wraunch's Avatar
 
Join Date: Sep 2005
Location: Clayton, NC
Posts: 782
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 22
It makes a huge difference. Also the WAF just shot through the roof!
wraunch is offline  
Reply Dedicated Theater Design & Construction

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off