Controlling Inline Fan With Thermostat and AVR - AVS Forum | Home Theater Discussions And Reviews
Forum Jump: 
Thread Tools
post #1 of 1 Old 05-06-2013, 08:28 PM - Thread Starter
AVS Forum Special Member
J_P_A's Avatar
Join Date: Dec 2008
Location: L.A. - Lower Alabama
Posts: 4,885
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Liked: 443
I woud like to wire up my exhaust fan to come on automatically when either my AVR/PJ or my HVAC is on. I think I figured out how to do it, but I'd like a sanity check. Here's the relay I'd like to use. It seems perfect since the coil is rated 10-30 VAC or VDC so it will handle both the 12 V AVR trigger as well as the 24 V thermostat voltage.

If I use two of these, I think I can connect the coil of one to the AVR/PJ 12V trigger, and the coil of the other to my HVAC thermostat. Then connect the contacts in parallel to supply the fan. Something like this.

Here's the part I'm not too sure about. I think this is how I need to connect the relay to the thermostat.

Anyone know if this is correct? Am I overlooking something?

EDIT: I forgot to mention, I've found one site that mentions the thermostat controls the fan during cooling, but the heat pump will control the fan during a heat cycle. Is that true? If so, this may not work as I'd hoped.

EDIT2: My diagram is for the thermostat connection should be between the G and C terminals. Ill try to fix that later today.

Dude, are you made of leprechauns? Cause that was awesome!

The Plains Theater Has Begun
J_P_A is offline  
Sponsored Links
Reply Dedicated Theater Design & Construction

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off