AVS Forum banner
  • You have not yet participated enough to use the Marketplace

MiniDSP 2x4 in rack mount case

1K views 4 replies 3 participants last post by  Axel 
#1 ·
For sale a MiniDSP 2x4 installed in a rack mount case. One input on XLR and four outputs. Nicely made. Includes DC power adapter. $200 OBO.
 

Attachments

See less See more
5
#4 ·
Hi Axel & Nyal,
Does the box do 2 independent settings for 4 outputs or is it global settings for all four outputs? My front subs are going to be farther than back subs therefore looking for a unit that can apply separate delay for each pair of outputs.
Thanks,
Vinod.
 
#5 ·
Hi Vinod,

This is dependent on the plug-in you will use. I am not sure if/which one Nyal has one included in his offer.
There are numerous ones available.

I use the '2.1 Advanced' plugin for my box that has 2 in / 4 out. I can set delays by output pair and I believe by also individual output. (The settings in this plugin are very tweakable.)

Since Nyal's box here is wired for 1 input, you may have to physically bridge the inputs (which would be easy to do), if you cannot do it with the 2.1 adv. plugin or see if another plugin would work better for your situation (with no rewiring needed).

Hope this helps.
____
Axel
 
You have insufficient privileges to reply here.
Top