Replace old Da-Lite Da-Tab Electrol with HD Screen - AVS Forum | Home Theater Discussions And Reviews
Forum Jump: 
Thread Tools
post #1 of 1 Old 09-26-2013, 02:51 PM - Thread Starter
ddell's Avatar
Join Date: Sep 2000
Location: Oakland, CA, USA
Posts: 126
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked: 10
Hi, I recently updated my projector to the Epson 5010E and I'm looking to replace my old 4-3 Da-lite screen with a 16:9 screen - probably with another vendor, since I, too, have been affected by the greasy breakdown of the vinyl in the Da-Lite. Throw is 129", and viewing distance about 132" (projector in a wall-mounted cabinet above the heads of the viewers. Projector is 2400 lumens. Ambient light varies a lot, but can be high. Usually quite low for evening viewing. I was 85" 4:3, and thinking of going with an 81" diagonal 16:9 which will keep the height to the 40" allowing for a non-seam Stewart screen if I'd like. One special requirement, while I don't want a perforated screen, I do want a perforated blackdrop as my center speaker is mounted above the TV cabinet. This may rule out a standard ceiling mounted screen...

Thoughts, Suggestions, Warnings?


ddell is offline  
Sponsored Links
Reply Screens

Epson 5010 E Powerlite Home Cinema 3d Front Projector With Wirelesshd , Da Lite 94025

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off