AVS Forum

AVS Forum (http://www.avsforum.com/forum/)
-   Screens (http://www.avsforum.com/forum/23-screens/)
-   -   Sherwin Williams Luminous White (http://www.avsforum.com/forum/23-screens/19369-sherwin-williams-luminous-white.html)

JasonBrooks 01-29-2001 04:03 PM

I am building my screen and have read that many of you use this paint. What gloss do you get? My local SW store sells it in flat satin and semi gloss.

------------------
Signature...Does anyone have a pen I can borrow?

KBK 01-29-2001 04:35 PM

I would immediately suggest the flat satin finish. You might try a bit of each if it is cheap enough, to arrive at a slightly higher gain mixture than the flat satin alone. I feel that the semi-gloss will be too hot (higer gain, but with too much hot-spotting) to be useful. I have never used either, but I am familiar with finishing texture characteristics.
Two coats will probably work better than one.

------------------
---Place Signature Here---

JasonBrooks 01-29-2001 04:47 PM

Whoops! I did not mean flat satin and semi gloss. I meant flat, satin, or semi gloss. KBK would you suggest the flat or the satin?

------------------
Signature...Does anyone have a pen I can borrow?


All times are GMT -7. The time now is 08:49 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.