I have a Stewart OptaWave 120 and a single mirror OptaMirror system with a Electrohome ECP 4501. I bought it all at a storage space auction and most of it is still in the original crates. There don't seem to be any manuals so I am looking for any info on what it might take to set it up. From what I know it appears that it will take about 5 feet behind the screen. If any one has any experience with this screen anything would be helpful. Also any ideas on where to get some manuals. I've already piked up some real good advice on projector maintenance from this board.
The Optawave screen is a lens type rear projection screen. It has a lenticular lens on the viewing side and a fresnel lens on the projector side of the screen. The light calumniating fresnel lens, was cut in Stewart's Ohio factory on one of the World's largest optical lathe. The lathe has a capacity to cut a 12 foot diameter fresnel lens. Let me tell you that you can smoke a few red ants or other small animals in the company parking lot with one of these lenses!
Anyway... The W.A.V.E. part of Optawave stands for: "Wide Angle Viewing Envelope" as the lenticular lens has a Half Gain out past 52 degrees allowing every seat in the house a very bright image. The Optawave will maximize the image Foot lamberts and is a perfect match for the Electrohome. The Mirror is a first surface optical glass mirror and comes with towers to hold the mirror frame in place around 6 or 7 feet of the floor. The Optakong mirror system also comes with a projector stand platform made to fit the electrohome projector. The MSRP, if bought today, would be over $14,000 for the screen and Optakong system.
If you can find the serial number off the outside of the crates it is very likely we have the original CAD details in our archives. We might be able to fax you a drawing of the set up geometry for the rear projection system.
Call 800 762-4999. Ask for Greg Van Arsdale. He is one of our top engineers. Also...be sure to explain to him your circumstances in detail as this will give him a better chance of finding the info you seek.
I hope this helps.
Regards and Good Luck,
[This message has been edited by Don Stewart (edited 02-18-2001).]
Thanks for the great info Don. I'll give Greg a call on Monday. I almost feel bad about what I paid for this stuff. I got the screen, projector and a rack full of SVHS vcr's and other misc. equip and about 14 JBL control 1's for under $2000.00. I've already sold most of the stuff on ebay but I wanted to see if I could fit this screen in my room or if I would have to build a new room or buy a new house. It sounds like it might be worth it to look for a new house and build it around this screen. Yipee!
Better yet--how does one get invited to a storage space auction? Wow! is all I can say--this is the deal of the year.
comm tech -
I've been looking for a deal on a screen like that for a couple years now. Guess I'll have to keep looking!
If for any reason you give up on your idea, PLEASE lemme know. Of course, now that Don has informed you (and everyone else) of its value.....
- A VERY envious Chris
|All times are GMT -7. The time now is 09:20 AM.|
Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.