AVS Forum

AVS Forum (http://www.avsforum.com/forum/)
-   Screens (http://www.avsforum.com/forum/23-screens/)
-   -   Stewart GreyHawk Screen Rollup Question (http://www.avsforum.com/forum/23-screens/19536-stewart-greyhawk-screen-rollup-question.html)

mcascio 03-17-2001 10:38 AM

I'm framing out and preparing to mount the Stewart screen - arriving in two weeks. I ordered the ElectriScreen ElectriMask 110" diagnol screen.

I'm wondering if everything rolls up into the casing or if some or part of the screen is hanging below the casing when it's not in use. Thanks for any help. This forum has been key in helping me build my theater.

For those interested, I've posted a new website regarding my home theater project:
http://www.webpromotion.com/htp/

------------------
Mario Cascio
Webpromotion, Inc.

jsnable 03-17-2001 02:34 PM

I asked Jason to fax me the shop drawings, so that's what I'm going on here. It appears that about 1.25" hangs down when fully retracted. That incudes the batten. You may want to get your drawings to confirm as mine is not a masking screen.

Jay

Don Stewart 03-17-2001 06:14 PM

Dear Mario,

The Electric Emask unit has a different housing than Jays. Both the screen and masking will retract fully up into the case. As Jay mentioned, it a good idea to request a set of shop drawings from the dealer that you purchased the screen from. They have a Stewart software program that will generate a full set of "Shop Drawings". This will contribute to your planning and will pay off when you install your unit.

Regards,

Don

If for some reason the dealer can not suppy you with the drawings call the factory 1 800 762-4999. They can make you a set and Email/fax them to you.


All times are GMT -7. The time now is 12:21 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.