Screen size 72" x 54", and LCD projector output is rated at 700 ANSI lumens, but nearer 650 in actuality. I've done the sums and I've worked out that with a 1.0 gain screen, I'd get 24.1 foot lamberts.
I do sometimes have moderately high ambient light, but I would mostly be watching movies at night. I'm considering the Da-Lite model B range. What sort of screen gain / surface should I be looking at?
Also, would I be able to specify a given length of black border above the screen? This would be to centre the height of the screen!
Thanks in advance,
[This message has been edited by jlanng (edited 05-20-2001).]
i have the model b and it is quite a nice screen (i like the it has sepaate locks for the different aspects
it dose tend to suffer ith the problem most pull downs have though a bit of sagging .the best thing i have found is to attach somthing to pull the bottom corners down a bit
not sure about the if you can specify a border size . the border size aint to bad though . on mine it's 5 inchs at the top and 3 1/2 on the other three sides
hope this helps
no one can tell you what home cinema is . you have to see it for yourself
Stewart's GreyHawk might be an option, it has a gain near 1.0 and it will give you better blacks and colours (less light bouncing around the room). Da-lite's grey screen (0.8 gain) might also be suitable as you have quite a bit of brightness on the screen.
If you plan to do any viewing in even moderate lighting a 1.3 gain screen would serve you well.
|All times are GMT -7. The time now is 05:50 PM.|
Powered by vBulletin® Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.