Thank you for posting your settings. I figured it would be good to have other settings too, so I am posting the two I found online: Projectorreviews.com & Hometheater.com. I was unable to find detailed calibration settings on Projectorcentral.com. I am currently testing out Hometheater.com's settings.
January 2, 2012, by Art Feierman (Updated February 19, 2012 March 1, 2012)
Color Temp is Normal for all but Dynamic, which is Lamp Native.
Brilliant Color is ON by default for all modes except Cinema and Standard.
Standard mode is in Eco lamp mode by default.
Lamp Mode=Normal (unless noted otherwise)
All other settings at default (untouched)
Auto Iris is Off for all measurements.
Zoom at mid rangeCinema (on User 1)
Offset (I think he meant Gain here)
R = 57
G = 50
B = 49
Gain (I think he meant Offset here)
R = 252
G = 253
B = 253
--HOME THEATER MAGAZINE
August 17, 2012, by Kris Deering
Mode: User 1
Sharpness: 5 (When I did the setup, my Sharpness only goes to two, so I thought maybe he meant the Flesh Tone was five, no response yet confirming my inquiry)
Flesh Tone: 0 (It is possible this is supposed to be 5, while the sharpness is supposed to be zero. No confirmation, yet)Advanced
Black Level: 0
IRE Clarity Control: All to 0
Color Temperature: Warm ColorTemperature Fine Tuning
Red Gain: 57
Green Gain: 45
Blue Gain: 48
Red Offset: 247
Green Offset: 247
Blue Offset: 245
Gamma Selection: 2.2
Brilliant Color: OffColor Management
Film Mode: On
3D Comb Filter: On
Dynamic Black: OnOther Settings
Aspect Ratio: Real Overscan
Frame Interpolation: Off
HDMI Settings: PC
High Altitude Mode: Off
Lamp Setting: Economic