EDID Override Thread - Page 4 - AVS Forum
Forum Jump: 
 2Likes
Reply
 
Thread Tools
post #91 of 3181 Old 12-07-2008, 07:15 PM
Member
 
skidoo1's Avatar
 
Join Date: Jul 2008
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by kemac View Post

Onkyo's have the option of passing the audio through to the TV via HDMI si I assume others do as well...

true, I've turned off passthrough as I guess most people would with a receiver, since not much point sending 5.1 etc to a TV. But it's a good point, when reading EDIDs with passthrough on, might cause strange results.
skidoo1 is offline  
Sponsored Links
Advertisement
 
post #92 of 3181 Old 12-07-2008, 10:20 PM
Newbie
 
tmsmith124's Avatar
 
Join Date: Nov 2008
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by RandomFoe View Post

Have a try using to info below, it will need to be cleaned up in the inf file so it only uses 1 line each. it looks like you might be trying to uses to much information for each block.


HKR,EDID_OVERRIDE,"0",0x01,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xF F,0x00,0x4C,0x2D,0x57,0x03,0x00,0x00,0x00,0x00,0x22,0x11,0x0 1,0x03,0x80,0x10,0x09,0x78,0x0A,0x1D,0xED,0xA7,0x53,0x34,0xA C,0x25,0x12,0x47,0x4A,0x21,0x08,0x00,0x81,0x80,0x01,0x01,0x0 1,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x0 2,0x3A,0x80,0x18,0x71,0x38,0x2D,0x40,0x58,0x2C,0x45,0x00,0xA 0,0x5A,0x00,0x00,0x00,0x1E,0x66,0x21,0x50,0xB0,0x51,0x00,0x1 B,0x30,0x40,0x70,0x36,0x00,0xA0,0x5A,0x00,0x00,0x00,0x1E,0x0 0,0x00,0x00,0xFD,0x00,0x17,0x3D,0x1A,0x44,0x17,0x00,0x0A,0x2 0,0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xFC,0x00,0x53,0x4 1,0x4D,0x53,0x55,0x4E,0x47,0x0A,0x20,0x20,0x20,0x20,0x20,0x0 1,0xBC


HKR,EDID_OVERRIDE,"1",0x01,0x02,0x03,0x33,0x71,0x48,0x90,0x04,0x05,0x03,0x20,0x2 2,0x0F,0x24,0x35,0x0F,0x7F,0x07,0x3D,0x1E,0xC0,0x15,0x07,0x5 0,0x5F,0x7E,0x01,0x57,0x06,0x00,0x65,0x7E,0x00,0x67,0x1E,0x0 0,0x83,0x5F,0x00,0x00,0xE3,0x05,0x03,0x01,0x67,0x03,0x0C,0x0 0,0x13,0x00,0xB8,0x2D,0x01,0x1D,0x80,0x18,0x71,0x1C,0x16,0x2 0,0x58,0x2C,0x25,0x00,0xA0,0x5A,0x00,0x00,0x00,0x9E,0x8C,0x0 A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00,0xA0,0x5 A,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0 0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0 0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0 0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF1

Thank you very much for the post. This time I couldn't even get the driver to load.

I redownloaded the attachment and added what you supplied and it gives me the error saying that it encountered a problem. Even after rolling back the drivers and restarting.

I really appreciate the help.

EDIT:

You sir, are amazing. I fixed a few of the copy typos I didn't notice in the beginning, restarted and it came up. Was searching for something to play, thinking, I know this isn't going to work (I've had trouble with it even before the receiver). Started it up, and instantly heard the gun fire from Band of Brothers. This is awesome and thank you so much for the help!
tmsmith124 is offline  
post #93 of 3181 Old 12-08-2008, 01:34 AM
Newbie
 
abbacabacc's Avatar
 
Join Date: Dec 2008
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Damnit,

i tried it exaclty as mentioned here, but cant get the sound to work with my pioneer vsx-lx50 receiver and my 46A789...

Is it possible that my DVI->HDMI dongle can cause the issue? my TV isnt detected as HDTV only as DVI. I didnt got a HDMI adaptor included within powercolor card pakage so i bought one from ebay...

Sorry for my "bad" english *g*

Greets,
Benedikt from germany
abbacabacc is offline  
post #94 of 3181 Old 12-08-2008, 02:56 AM
Newbie
 
idefix-ef's Avatar
 
Join Date: Dec 2008
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
is there a solution for winxp also ?
idefix-ef is offline  
post #95 of 3181 Old 12-08-2008, 08:00 AM
Member
 
axell's Avatar
 
Join Date: Oct 2008
Location: UK
Posts: 83
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by idefix-ef View Post

is there a solution for winxp also ?

+1 !
axell is offline  
post #96 of 3181 Old 12-08-2008, 10:22 PM
Member
 
fast--'s Avatar
 
Join Date: May 2007
Posts: 23
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by idefix-ef View Post

is there a solution for winxp also ?

I am taking a shot at one. found post on HardForum from a guy who had problems with nvidia cards not recognizing the EDID from Westinghouse TVs that I remembered reading about when I was comtemplating purchasing a Westy.
The fix involves a registry mod, as opposed to the .inf/driver mod utilized with Vista. From what I have read, Vista was designed to allow developers to push out .inf fixes to address problems with applications/hardware not correctly reading EDID data. It does not appear that XP has the capability to easily accept such changes, or perhaps nobody gives a damn about XP/they want us to upgrade. Because of the large number of variables involved, I really doubt that ATI is going to deliver a fix in the near future.
Essentially, the XP mod appears to use the same 128 bit EDID data that you use with the Vista mod, and similar override instructions, it just requires a reg edit command to load into the registry.
Here is a link to give you some idea of what I am attempting: http://www.hardforum.com/showthread....post1032412520
EDIT: I could use some help. if you look at the two override commands, one being for vista with an ati card and the other for xp with a nvidia card, I cant tell whether the difference is due to nvidia vs. ati drivers, or vista vs. XP.
Vista/ati "EDID_OVERRIDE"
XP/nvidia "OverrideEdidFlags"

I can't decide which command to use.
fast-- is offline  
post #97 of 3181 Old 12-09-2008, 04:40 AM
Newbie
 
idefix-ef's Avatar
 
Join Date: Dec 2008
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
No hdmi Sound with xp and no Fullscreen mirror in vista. Seems like a problem. switch from nvidia to ati to become the theater function back but vista doesn´t support that function for copyright reaseons. so i can have fullscreen mirror in xp or hdmi sound with vista. That´s not funny. Hope ati will fix it with 8.12. :-(
idefix-ef is offline  
post #98 of 3181 Old 12-09-2008, 02:38 PM
Newbie
 
jkkx's Avatar
 
Join Date: Dec 2008
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
I have Asus 4670 on my vista 32bit based htpc and Sony str-dg820 amplifier. I had only stereo pcm sound available, no DD/DTS bitstream. This was with Realtek HDMI driver 2.03 and 2.09. Using RandomFoe's inf file modified with my amplifier edid data didn't help at all. I redid the inf mod couple of times just to be sure that I made it correctly. No tv was connected to amp when I used moninfo (used remoted desktop).
Next I tried hdmi and catalyst driver from the driver cd that came with the graphics card. That gave me 5.1 pcm delivered to amp, but no DD/DTS bitstream. Last thing I tried was unmodified RandomFoe's inf file with yamaha data, and now I got 5.1 pcm with DD/DTS bitstream, and sample rates up to 192KHz/24bit(previously only upto 48KHz/16bit). And I can use any version of hdmi driver and still get all options. Sth incompatible with str-dg820 edid and asus 4670?

sony str-dg820 edid info from video1 hdmi(tried also bd hdmi, couple values different, but didn't work either)

Raw data................. 00,FF,FF,FF,FF,FF,FF,00,4D,D9,01,4C,01,01,01,01,0A,12,01,03, 80,50,2D,78,0A,0D,C9,A0,57,47,98,27,
......................... 12,48,4C,20,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01, 01,01,01,1D,00,72,51,D0,1E,20,6E,28,
......................... 55,00,C4,8E,21,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00, C4,8E,21,00,00,18,00,00,00,FC,00,53,
......................... 4F,4E,59,20,41,56,41,4D,50,0A,20,20,00,00,00,FD,00,31,3D,0F, 2E,08,00,0A,20,20,20,20,20,20,01,A1,
......................... 02,03,44,71,4D,83,04,05,0E,0F,10,12,13,14,1D,1E,1F,20,32,61, 7E,00,65,7E,00,67,1E,00,59,7E,01,5D,
......................... 7E,01,5F,1E,01,32,09,7F,07,0D,7F,07,0F,7F,07,15,07,55,3D,1F, C0,57,06,00,83,5F,00,00,67,03,0C,00,
......................... 11,00,B8,2D,8C,0A,D0,90,20,40,31,20,0C,40,55,00,C4,8E,21,00, 00,18,01,1D,00,BC,52,D0,1E,20,B8,28,
......................... 55,40,C4,8E,21,00,00,1E,00,00,00,00,00,00,00,00,00,00,00,00, 00,00,00,00,00,00,00,00,00,00,00,AE
jkkx is offline  
post #99 of 3181 Old 12-09-2008, 02:55 PM
Member
 
bingobill's Avatar
 
Join Date: May 2007
Posts: 97
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
For the 1st line in the .inf you should use the top half of the raw data from your TV, for the second line in the .inf you should use the bottom half of the raw data from your Sony str-dg820.
bingobill is offline  
post #100 of 3181 Old 12-09-2008, 02:59 PM
AVS Special Member
 
archibael's Avatar
 
Join Date: Jul 2002
Location: Phoenix, AZ
Posts: 4,098
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Hmmm... you have three different LPCM entries: 2 channel, 6 channel, and 8 channel. I suggest choosing only one, then using Windows to decide which to send.

I do not speak officially in any sense for
Intel Corp., Technology Manufacturing Group
but I do work there.
archibael is offline  
post #101 of 3181 Old 12-09-2008, 03:00 PM
Newbie
 
JoeTheDestroyer's Avatar
 
Join Date: Dec 2006
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Out of curiousity, has anybody actually tried it on XP? I know the Microsoft page says it's for >=Vista, but I've known those pages to be wrong before too.

If nobody has, I may give it a try this weekend...
JoeTheDestroyer is offline  
post #102 of 3181 Old 12-09-2008, 03:52 PM
Member
 
fast--'s Avatar
 
Join Date: May 2007
Posts: 23
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by JoeTheDestroyer View Post

Out of curiousity, has anybody actually tried it on XP? I know the Microsoft page says it's for >=Vista, but I've known those pages to be wrong before too.

If nobody has, I may give it a try this weekend...

Yes, I tried it with XP MCE 2005 and it was no go. CCC still indicating DVI connection. Thats why I am attempting a registry mod. Unfortunately, I have a day job, wife, dog, etc, all of which are getting agravated about how much time I have put into trying to fix this.
fast-- is offline  
post #103 of 3181 Old 12-09-2008, 04:05 PM
Member
 
fast--'s Avatar
 
Join Date: May 2007
Posts: 23
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
archibael, I would greatly appreciate it if you would point me in the direction of a guide to what each bit of the EDID data pertains to and does. I am assuming from the knowledge you display that you either have such a guide or are using a program.
fast-- is offline  
post #104 of 3181 Old 12-09-2008, 07:36 PM
 
bugme's Avatar
 
Join Date: Nov 2008
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by bingobill View Post

Cool don't you just love these forums

Actually it turns out disabling that service only MOSTLY fixed the problem. Sometimes the "Sound" section in the control panel will detect the HDMI as "not plugged in", and I can't seem to change it without restarting my computer. I'm not entirely sure what's causing this, but I kind of suspect that my power settings are (after 30 minutes, turn monitors off).
bugme is offline  
post #105 of 3181 Old 12-09-2008, 07:39 PM
Member
 
Aestis's Avatar
 
Join Date: Nov 2004
Posts: 23
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
The values returned from moninfo have far more characters than the corrected values you are posting. For example, here are my raw values

Sony KDS-R60XBR1

HKR,EDID_OVERRIDE,"0",0x01,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x4D,0xD9,0xF8 ,0x01,0x01,0x01,0x01,0x01,0x00,0x0E,0x01,0x03,0x80,0x00,0x00 ,0x78,0x0A,0x0D,0xC9,0xA0,0x57,0x47,0x98,0x27,0x12,0x48,0x4C ,0x20,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 ,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x1D,0x80,0x18,0x71 ,0x1C,0x16,0x20,0x58,0x2C,0x25,0x00,0x10,0x09,0x00,0x00,0x00 ,0x9E,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96 ,0x00,0x04,0x03,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0xFC,0x00 ,0x53,0x4F,0x4E,0x59,0x20,0x54,0x56,0x0A,0x20,0x20,0x20,0x20 ,0x20,0x00,0x00,0x00,0xFD,0x00,0x3B,0x3D,0x0F,0x2E,0x08,0x00 ,0x0A,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0xDF,0x02,0x03,0x1A ,0x76,0x47,0x85,0x02,0x03,0x04,0x06,0x07,0x01,0x23,0x09,0x07 ,0x07,0x83,0x01,0x00,0x00,0x65,0x03,0x0C,0x00,0x20,0x00,0x01 ,0x1D,0x00,0x72,0x51,0xD0,0x1E,0x20,0x6E,0x28,0x55,0x00,0x10 ,0x09,0x00,0x00,0x00,0x1E,0x8C,0x0A,0xA0,0x14,0x51,0xF0,0x16 ,0x00,0x26,0x7C,0x43,0x00,0x04,0x03,0x00,0x00,0x00,0x98,0x8C ,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00,0x10 ,0x09,0x00,0x00,0x00,0x18,0x8C,0x0A,0xA0,0x14,0x51,0xF0,0x16 ,0x00,0x26,0x7C,0x43,0x00,0x10,0x09,0x00,0x00,0x00,0x98,0x00 ,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 ,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 ,0x00,0x00,0x00,0x00,0x87

Pioneer SC-05

HKR,EDID_OVERRIDE,"1",0x01,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x41,0x2F,0x00 ,0x00,0x01,0x01,0x01,0x01,0x00,0x12,0x01,0x03,0x80,0x00,0x00 ,0x78,0x0A,0x0D,0xC9,0xA0,0x57,0x47,0x98,0x27,0x12,0x48,0x4C ,0x20,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 ,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x1D,0x80,0x18,0x71 ,0x1C,0x16,0x20,0x58,0x2C,0x25,0x00,0x10,0x09,0x00,0x00,0x00 ,0x9E,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96 ,0x00,0x04,0x03,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0xFD,0x00 ,0x3B,0x3D,0x0F,0x2E,0x08,0x00,0x0A,0x20,0x20,0x20,0x20,0x20 ,0x20,0x00,0x00,0x00,0xFC,0x00,0x53,0x43,0x2D,0x30,0x35,0x0A ,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0x35,0x02,0x03,0x39 ,0x74,0x4D,0x85,0x02,0x03,0x04,0x06,0x07,0x01,0x0E,0x23,0x0F ,0x24,0x0A,0x0B,0x3B,0x09,0x7F,0x07,0x0F,0x7F,0x07,0x15,0x07 ,0x50,0x3E,0x1E,0xC0,0x4D,0x02,0x00,0x57,0x06,0x00,0x5F,0x7E ,0x01,0x67,0x7E,0x00,0x77,0x1F,0x03,0x83,0x4F,0x00,0x00,0x66 ,0x03,0x0C,0x00,0x12,0x00,0x80,0x01,0x1D,0x00,0x72,0x51,0xD0 ,0x1E,0x20,0x6E,0x28,0x55,0x00,0x10,0x09,0x00,0x00,0x00,0x1E ,0x8C,0x0A,0xA0,0x14,0x51,0xF0,0x16,0x00,0x26,0x7C,0x43,0x00 ,0x04,0x03,0x00,0x00,0x00,0x98,0x8C,0x0A,0xD0,0x8A,0x20,0xE0 ,0x2D,0x10,0x10,0x3E,0x96,0x00,0x10,0x09,0x00,0x00,0x00,0x18 ,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 ,0x00,0x00,0x00,0x00,0xAC

Clearly these are far longer than the ones that you have posted for known working devices. How do you trim them down to the size they are supposed to be?

Actually those are changed to look like the registry file format, here's the raw values:

TV


00,FF,FF,FF,FF,FF,FF,00,4D,D9,F8,01,01,01,01,01,00,0E,01,03, 80,00,00,78,0A,0D,C9,A0,57,47,98,27,
......................... 12,48,4C,20,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01, 01,01,01,1D,80,18,71,1C,16,20,58,2C,
......................... 25,00,10,09,00,00,00,9E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00, 04,03,00,00,00,18,00,00,00,FC,00,53,
......................... 4F,4E,59,20,54,56,0A,20,20,20,20,20,00,00,00,FD,00,3B,3D,0F, 2E,08,00,0A,20,20,20,20,20,20,01,DF,
......................... 02,03,1A,76,47,85,02,03,04,06,07,01,23,09,07,07,83,01,00,00, 65,03,0C,00,20,00,01,1D,00,72,51,D0,
......................... 1E,20,6E,28,55,00,10,09,00,00,00,1E,8C,0A,A0,14,51,F0,16,00, 26,7C,43,00,04,03,00,00,00,98,8C,0A,
......................... D0,8A,20,E0,2D,10,10,3E,96,00,10,09,00,00,00,18,8C,0A,A0,14, 51,F0,16,00,26,7C,43,00,10,09,00,00,
......................... 00,98,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, 00,00,00,00,00,00,00,00,00,00,00,87

Receiver

00,FF,FF,FF,FF,FF,FF,00,41,2F,00,00,01,01,01,01,00,12,01,03, 80,00,00,78,0A,0D,C9,A0,57,47,98,27,
......................... 12,48,4C,20,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01, 01,01,01,1D,80,18,71,1C,16,20,58,2C,
......................... 25,00,10,09,00,00,00,9E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00, 04,03,00,00,00,18,00,00,00,FD,00,3B,
......................... 3D,0F,2E,08,00,0A,20,20,20,20,20,20,00,00,00,FC,00,53,43,2D, 30,35,0A,20,20,20,20,20,20,20,01,35,
......................... 02,03,39,74,4D,85,02,03,04,06,07,01,0E,23,0F,24,0A,0B,3B,09, 7F,07,0F,7F,07,15,07,50,3E,1E,C0,4D,
......................... 02,00,57,06,00,5F,7E,01,67,7E,00,77,1F,03,83,4F,00,00,66,03, 0C,00,12,00,80,01,1D,00,72,51,D0,1E,
......................... 20,6E,28,55,00,10,09,00,00,00,1E,8C,0A,A0,14,51,F0,16,00,26, 7C,43,00,04,03,00,00,00,98,8C,0A,D0,
......................... 8A,20,E0,2D,10,10,3E,96,00,10,09,00,00,00,18,00,00,00,00,00, 00,00,00,00,00,00,00,00,00,00,00,AC
Aestis is offline  
post #106 of 3181 Old 12-09-2008, 08:09 PM
Member
 
Aestis's Avatar
 
Join Date: Nov 2004
Posts: 23
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Just going by the length of what other people posted, here's what I came out with for mine. Do you mind seeing if this looks right?

Code:
HKR,EDID_OVERRIDE,"0",0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x4D,0xD9,0xF8,0x01,0x01,0x01,0x01,0x01,0x00,0x0E,0x01,0x03,0x80,0x00,0x00,0x78,0x0A,0x0D,0xC9,0xA0,0x57,0x47,0x98,0x27,0x12,0x48,0x4C,0x20,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x1D,0x80,0x18,0x71,0x1C,0x16,0x20,0x58,0x2C,0x25,0x00,0x10,0x09,0x00,0x00,0x00,0x9E,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00,0x04,0x03,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0xFC,0x00,0x53,0x4F,0x4E,0x59,0x20,0x54,0x56,0x0A,0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xFD,0x00,0x3B,0x3D,0x0F,0x2E,0x08,0x00,0x0A,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0xDF,0x02
HKR,EDID_OVERRIDE,"1",0x01,0x02,0x03,0x39,0x74,0x4D,0x85,0x02,0x03,0x04,0x06,0x07,0x01,0x0E,0x23,0x0F,0x24,0x0A,0x0B,0x3B,0x09,0x7F,0x07,0x0F,0x7F,0x07,0x15,0x07,0x50,0x3E,0x1E,0xC0,0x4D,0x02,0x00,0x57,0x06,0x00,0x5F,0x7E,0x01,0x67,0x7E,0x00,0x77,0x1F,0x03,0x83,0x4F,0x00,0x00,0x66,0x03,0x0C,0x00,0x12,0x00,0x80,0x01,0x1D,0x00,0x72,0x51,0xD0,0x1E,0x20,0x6E,0x28,0x55,0x00,0x10,0x09,0x00,0x00,0x00,0x1E,0x8C,0x0A,0xA0,0x14,0x51,0xF0,0x16,0x00,0x26,0x7C,0x43,0x00,0x04,0x03,0x00,0x00,0x00,0x98,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00,0x10,0x09,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xAC
Aestis is offline  
post #107 of 3181 Old 12-09-2008, 08:25 PM
Newbie
 
rangerphil's Avatar
 
Join Date: Sep 2005
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by kemac View Post

Not sure if you knew but the 4XXX cards worked fine on the 606 prior to this workaround but only on HDMI port 1, the other ports should work now with this workaround.

The 806 didn't work with any ports prior to this workaround without using a DVI-Detective but know I can confirm it does work with this workaround.

Kemac, care to share your 806 number.
Thanks.
rangerphil is offline  
post #108 of 3181 Old 12-09-2008, 08:51 PM
Member
 
Aestis's Avatar
 
Join Date: Nov 2004
Posts: 23
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by Aestis View Post

Just going by the length of what other people posted, here's what I came out with for mine. Do you mind seeing if this looks right?

Code:
HKR,EDID_OVERRIDE,"0",0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x4D,0xD9,0xF8,0x01,0x01,0x01,0x01,0x01,0x00,0x0E,0x01,0x03,0x80,0x00,0x00,0x78,0x0A,0x0D,0xC9,0xA0,0x57,0x47,0x98,0x27,0x12,0x48,0x4C,0x20,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x1D,0x80,0x18,0x71,0x1C,0x16,0x20,0x58,0x2C,0x25,0x00,0x10,0x09,0x00,0x00,0x00,0x9E,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00,0x04,0x03,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0xFC,0x00,0x53,0x4F,0x4E,0x59,0x20,0x54,0x56,0x0A,0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xFD,0x00,0x3B,0x3D,0x0F,0x2E,0x08,0x00,0x0A,0x20,0x20,0x20,0x20,0x20,0x20,0x01,0xDF,0x02
HKR,EDID_OVERRIDE,"1",0x01,0x02,0x03,0x39,0x74,0x4D,0x85,0x02,0x03,0x04,0x06,0x07,0x01,0x0E,0x23,0x0F,0x24,0x0A,0x0B,0x3B,0x09,0x7F,0x07,0x0F,0x7F,0x07,0x15,0x07,0x50,0x3E,0x1E,0xC0,0x4D,0x02,0x00,0x57,0x06,0x00,0x5F,0x7E,0x01,0x67,0x7E,0x00,0x77,0x1F,0x03,0x83,0x4F,0x00,0x00,0x66,0x03,0x0C,0x00,0x12,0x00,0x80,0x01,0x1D,0x00,0x72,0x51,0xD0,0x1E,0x20,0x6E,0x28,0x55,0x00,0x10,0x09,0x00,0x00,0x00,0x1E,0x8C,0x0A,0xA0,0x14,0x51,0xF0,0x16,0x00,0x26,0x7C,0x43,0x00,0x04,0x03,0x00,0x00,0x00,0x98,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00,0x10,0x09,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xAC

Just to confirm, this did work.
Aestis is offline  
post #109 of 3181 Old 12-10-2008, 04:54 AM
AVS Special Member
 
mpgxsvcd's Avatar
 
Join Date: Oct 2003
Location: Cary, NC
Posts: 5,284
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Spyre(A Cat beta tester) hinted that this problem might be fixed in the Cat 8.12 drivers that will be released today.

http://www.rage3d.com/board/showpost...9&postcount=50

The 8.12 drivers should be better at working since parts of the EDID were changed. (allegedly)
mpgxsvcd is offline  
post #110 of 3181 Old 12-10-2008, 06:11 AM
Advanced Member
 
kemac's Avatar
 
Join Date: Nov 2004
Location: Mesa,AZ
Posts: 721
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 13
Quote:
Originally Posted by rangerphil View Post

Kemac, care to share your 806 number.
Thanks.

Sure, I'll post it later today, btw the sample posted by randomfoe woked fine for me as well if your in a hurry, just reports your AVR/monitor as a Samsung if I recall.
kemac is online now  
post #111 of 3181 Old 12-10-2008, 07:45 AM
Newbie
 
JoeTheDestroyer's Avatar
 
Join Date: Dec 2006
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by fast-- View Post

archibael, I would greatly appreciate it if you would point me in the direction of a guide to what each bit of the EDID data pertains to and does. I am assuming from the knowledge you display that you either have such a guide or are using a program.

http://en.wikipedia.org/wiki/EDID was a good place to start for me.

Quote:
Originally Posted by Aestis View Post

Pioneer SC-05
...
Clearly these are far longer than the ones that you have posted for known working devices. How do you trim them down to the size they are supposed to be?

Interesting, I'm trying to get my SC-05 working too.

To summarize from the above, the first 128 bytes you are getting (from both devices) is the original data block designed to allow CRT monitors to tell video cards their timings. It contains nothing about audio, and ATSC standard resolutions can be problematic. To correct this, the "CEA EDID Timing Extension" block was created to specify audio capabilities and to indicate compatibility with exact common resolutions (including ATSC ones such as 720p and 1080i). This extension block (and possibly others) is placed in the second set of 128 bytes (for a total of 256 bytes of data).

Since the video card looks in the first 128bytes for video capabilities and the second 128bytes for audio capabilities, a quick and dirty way to create a working EDID is to use the first 128bytes (positions 0-127) from the EDID reported by your monitor and the second 128bytes (positions 128-255) from the EDID reported by your receiver. This isn't 100% guaranteed to work, but should most of the time.

One particular gotcha I should mention is if your display only returns a 128 byte block (instead of 256 bytes) the above method will not work. Byte 126 will need to be changed to (probably) 1 and the checksum in byte 127 will need to be recalculated.
JoeTheDestroyer is offline  
post #112 of 3181 Old 12-10-2008, 08:12 AM
Senior Member
 
redtyler1's Avatar
 
Join Date: Jan 2007
Posts: 423
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Can someone check my values?

Raw data for Toshiba monitor
Raw data................. 00,FF,FF,FF,FF,FF,FF,00,52,62,06,02,01,01,01,01,FF,12,01,03, 80,69,3B,78,0A,0D,C9,A0,57,47,98,27,
......................... 12,48,4C,2D,CE,00,81,80,8B,C0,01,01,01,01,01,01,01,01,01,01, 01,01,02,3A,80,18,71,38,2D,40,58,2C,
......................... 45,00,C4,8E,21,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00, C4,8E,21,00,00,18,00,00,00,FC,00,54,
......................... 53,42,2D,54,56,0A,20,20,20,20,20,20,00,00,00,FD,00,17,4C,0F, 44,0F,00,0A,20,20,20,20,20,20,01,CC,
......................... 02,03,24,71,4A,90,05,04,03,07,02,06,01,20,22,23,09,07,07,6C, 03,0C,00,20,00,38,2D,C0,33,33,3B,3B,
......................... E3,05,03,01,01,1D,80,18,71,1C,16,20,58,2C,25,00,C4,8E,21,00, 00,9E,01,1D,00,72,51,D0,1E,20,6E,28,
......................... 55,00,C4,8E,21,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00, 13,8E,21,00,00,18,8C,0A,A0,14,51,F0,
......................... 16,00,26,7C,43,00,13,8E,21,00,00,98,8C,0A,A0,14,51,F0,16,00, 26,7C,43,00,C4,8E,21,00,00,98,00,72

Raw Data for Onkyo SR606
Raw data................. 00,FF,FF,FF,FF,FF,FF,00,3D,CB,63,08,00,00,00,00,00,12,01,03, 80,00,00,78,0A,0D,C9,A0,57,47,98,27,
......................... 12,48,4C,00,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01, 01,01,01,1D,80,18,71,1C,16,20,58,2C,
......................... 25,00,C4,8E,21,00,00,9E,01,1D,80,D0,72,1C,16,20,10,2C,25,80, C4,8E,21,00,00,9E,00,00,00,FC,00,54,
......................... 58,2D,53,52,36,30,36,0A,20,20,20,20,00,00,00,FD,00,17,F0,0F, 7E,11,00,0A,20,20,20,20,20,20,01,8E,
......................... 02,03,3E,72,55,85,04,03,02,0E,0F,07,23,24,10,94,13,12,11,1D, 1E,16,25,26,01,1F,38,09,7F,07,0F,7F,
......................... 07,17,07,50,3F,06,C0,4D,02,00,57,06,00,5F,7E,01,67,54,00,83, 4F,00,00,66,03,0C,00,10,00,80,8C,0A,
......................... D0,8A,20,E0,2D,10,10,3E,96,00,C4,8E,21,00,00,18,8C,0A,D0,90, 20,40,31,20,0C,40,55,00,C4,8E,21,00,
......................... 00,18,01,1D,00,72,51,D0,1E,20,6E,28,55,00,C4,8E,21,00,00,1E, 00,00,00,00,00,00,00,00,00,00,00,A2

Here is what I came up with

Toshiba first 128:
0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x52,0x62,0x06,0x02, 0x01,0x01,0x01,0x01,0xFF,0x12,0x01,0x03,0x80,0x69,0x3B,0x78, 0x0A,0x0D,0xC9,0xA0,0x57,0x47,0x98,0x27,0x12,0x48,0x4C,0x2D, 0xCE,0x00,0x81,0x80,0x8B,0xC0,0x01,0x01,0x01,0x01,0x01,0x01, 0x01,0x01,0x01,0x01,0x01,0x01,0x02,0x3A,0x80,0x18,0x71,0x38, 0x2D,0x40,0x58,0x2C,0x45,0x00,0xC4,0x8E,0x21,0x00,0x00,0x1E, 0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00, 0xC4,0x8E,0x21,0x00,0x00,0x18,0x00,0x00,0x00,0xFC,0x00,0x54, 0x53,0x42,0x2D,0x54,0x56,0x0A,0x20,0x20,0x20,0x20,0x20,0x20, 0x00,0x00,0x00,0xFD,0x00,0x17,0x4C,0x0F,0x44,0x0F,0x00,0x0A, 0x20,0x20,0x20,0x20,0x20,0x20,0x01,0xCC

Onkyo second 128
0x02,0x03,0x3E,0x72,0x55,0x85,0x04,0x03,0x02,0x0E,0x0F,0x07, 0x23,0x24,0x10,0x94,0x13,0x12,0x11,0x1D,0x1E,0x16,0x25,0x26, 0x01,0x1F,0x38,0x09,0x7F,0x07,0x0F,0x7F,0x07,0x17,0x07,0x50, 0x3F,0x06,0xC0,0x4D,0x02,0x00,0x57,0x06,0x00,0x5F,0x7E,0x01, 0x67,0x54,0x00,0x83,0x4F,0x00,0x00,0x66,0x03,0x0C,0x00,0x10, 0x00,0x80,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E, 0x96,0x00,0xC4,0x8E,0x21,0x00,0x00,0x18,0x8C,0x0A,0xD0,0x90, 0x20,0x40,0x31,0x20,0x0C,0x40,0x55,0x00,0xC4,0x8E,0x21,0x00, 0x00,0x18,0x01,0x1D,0x00,0x72,0x51,0xD0,0x1E,0x20,0x6E,0x28, 0x55,0x00,0xC4,0x8E,0x21,0x00,0x00,0x1E,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xA2

Thanks for anyone who has some time to look.

Alex
redtyler1 is offline  
post #113 of 3181 Old 12-10-2008, 08:17 AM
AVS Special Member
 
archibael's Avatar
 
Join Date: Jul 2002
Location: Phoenix, AZ
Posts: 4,098
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by fast-- View Post

archibael, I would greatly appreciate it if you would point me in the direction of a guide to what each bit of the EDID data pertains to and does. I am assuming from the knowledge you display that you either have such a guide or are using a program.

JoeTheDestroyer's suggestion of the Wikipedia entry is best. I wrote it. Well, the parts about the second EDID block, anyway. The original source material is the CEA/EIA-861B spec, if you want to go old school; I just attempted to translate it into something resembling English.

As Joe points out, the second 128 byte block is where the audio data resides. After a listing of "short video descriptors" is a list of "short audio descriptors", which is really what everyone is tweaking to get their receiver working properly with LPCM sound.

I do not speak officially in any sense for
Intel Corp., Technology Manufacturing Group
but I do work there.
archibael is offline  
post #114 of 3181 Old 12-10-2008, 08:41 AM
Newbie
 
JoeTheDestroyer's Avatar
 
Join Date: Dec 2006
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by fast-- View Post

Yes, I tried it with XP MCE 2005 and it was no go. CCC still indicating DVI connection. Thats why I am attempting a registry mod. Unfortunately, I have a day job, wife, dog, etc, all of which are getting agravated about how much time I have put into trying to fix this.

Cool, I'm eager to hear your results.

I feel your pain, I don't have a family, but I do know how much I am getting aggravated about how much time I have put into trying to fix this.
JoeTheDestroyer is offline  
post #115 of 3181 Old 12-10-2008, 08:45 AM
Member
 
kikistan's Avatar
 
Join Date: Jun 2007
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Catalyst 8.12 available
HDMI bug repaired
kikistan is offline  
post #116 of 3181 Old 12-10-2008, 08:53 AM
Advanced Member
 
genro's Avatar
 
Join Date: May 2004
Posts: 769
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by kikistan View Post

Catalyst 8.12 available
HDMI bug repaired

I saw mention of that in the notes but it said for XP. Have you confirmed this yourself?
genro is offline  
post #117 of 3181 Old 12-10-2008, 09:19 AM
Member
 
kikistan's Avatar
 
Join Date: Jun 2007
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Not i'm under vista

But .... now totalmedia theater doesn't work
LOL
kikistan is offline  
post #118 of 3181 Old 12-10-2008, 09:22 AM
Senior Member
 
redtyler1's Avatar
 
Join Date: Jan 2007
Posts: 423
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
How is it repaired? What are your system specs?
redtyler1 is offline  
post #119 of 3181 Old 12-10-2008, 09:22 AM
Advanced Member
 
terryj47's Avatar
 
Join Date: Oct 2007
Location: Arleta, CA
Posts: 625
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by kikistan View Post

Catalyst 8.12 available
HDMI bug repaired

Yeah right!

(Actually I hope you are right!).

Waiting for someone to test. I can't mess with it until the weekend.
terryj47 is offline  
post #120 of 3181 Old 12-10-2008, 10:27 AM
AVS Special Member
 
mpgxsvcd's Avatar
 
Join Date: Oct 2003
Location: Cary, NC
Posts: 5,284
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by kikistan View Post

Catalyst 8.12 available
HDMI bug repaired

My guess is that they did fix this!

Using an HDMI cable to connect an ATI All-in-Wonder to a Yamaha receiver
may result in the display resolution being limited to 1280x1024 and audio
failing to function
mpgxsvcd is offline  
Reply Home Theater Computers

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off