AVS Forum

AVS Forum (http://www.avsforum.com/forum/)
-   Home Theater Computers (http://www.avsforum.com/forum/26-home-theater-computers/)
-   -   noob question... (http://www.avsforum.com/forum/26-home-theater-computers/1451792-noob-question.html)

Nodollas 01-14-2013 07:05 AM

I have decided to dive in to an htpc... I'm just starting to get a list together while reading here and other places to make sure I"m not disappointed in the end. The question to start off with is, the connection between my pc and my tv (through my av reciever)... is it as simple as hdmi out of the pc, hdmi in my reciever, hdmi out of the reciever to the tv? The reciever is a pioneer vsx 1018... if it makes any difference.
I know this is basic, please be patient with a greenie

kapone 01-14-2013 07:14 AM

is it as simple as hdmi out of the pc, hdmi in my reciever, hdmi out of the reciever to the tv? - Yup.

monkeymania 01-14-2013 07:45 AM

Agreed, it should be that simple.

For me, my Onkyo receiver hesitated a bit and caused about a 2 second delay with sound when changing channels, so I decided to go HTPC --> TV (HDMI), then TV--> Rec (optical audio). Problem fixed. I have since sold all my other input devices, so this really makes no diff for the user experience.

lovekeiiy 01-14-2013 12:22 PM

yes, that simple to connect. you may have to tweak the resolution or something, but to get a picture, nope. Most newer TVs will be can be detected by Windows 7 or later without any problems.

Nodollas 01-14-2013 12:50 PM

Cool.... I'm sure I'll be posting back. Thanks Guys

psuKinger 01-14-2013 03:09 PM

Short answer: yes

But if you connect your equipment this way, you probably won't be able to work with your HTPC unless the AVR is on and tuned to the HTPC input. Without power to the AVR and the proper input selected, the signal won't travel to the HDTV, so you won't be able to see/manipulate your desktop until you turn the AVR on.

As long as that's ok with you, then the arrangement you've mentioned will work. I personally would prefer to have the option to use an AVR, but not required to do so... but my efforts to use an HDMI Splitter (to the HDTV and the AVR in parallel) have, to-date, been failures.

kapone 01-14-2013 04:34 PM

My Denon 4311 has a "passthrough" setting for HDMI, where that input is passed through, even if the AVR is off.


All times are GMT -7. The time now is 06:44 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.