AVS Forum

AVS Forum (http://www.avsforum.com/forum/)
-   Home Theater Computers (http://www.avsforum.com/forum/26-home-theater-computers/)
-   -   NO SOUND PC coax to receiver (http://www.avsforum.com/forum/26-home-theater-computers/1466578-no-sound-pc-coax-receiver.html)

Kaspar1985 04-03-2013 01:07 PM

Hey out there.. I have a problem... I jsut bought a yamaha rx.v359, because my old denon avr2105 had a little fire in it.. I then hooked up the yamaha to my pc with a coax cable, which worked fine with the denon. But with the yamaha no sounds comes out..

on the yamaha where the coax input is. It says DVD. So i choose the DVD source on the display.. and set it to DTS.. no sound

I have tried changning the 192kHz/24-Bit on the computer but no sound..

I have tried to see if the DTS would play on any of the other sources. no sound.

I have tried and tried to push every button but no f........... sound..

Sammy2 04-03-2013 01:18 PM

Where did you acquire this receiver? It seems to be an older model. Was it used? Maybe it is broken. What output on the PC are you using?

erickotz 04-03-2013 01:20 PM

If you set it to PCM and 44.1/16, does that work? Also on some receivers (like my Onkyo) you have to assign the digital inputs to sources - did you do that if required?

Kaspar1985 04-03-2013 01:33 PM

Erhm pcm.. Is that on the receiver?
When you say 44.1/16 you mean the khz and bit?

The KHZ i have tried to change on the PC... 44, 96 192.. The receiver should support 192...

Kaspar1985 04-03-2013 01:34 PM

well i bought is used for 100 dollars.. im using the same as i id with the denon.. if thats what you are asking.. or are you asking about the khz

Mrkazador 04-03-2013 01:44 PM

If you bought it used then do a factory reset. The digital input may have been reassigned (or disabled?) to a different input so a reset will revert it back to its default settings. In the audio decoder you are using for your media player, make sure bitstream is enabled. If you have a dvd or bluray player, have you tried using that?



All times are GMT -7. The time now is 11:19 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.