AVS Forum banner

Matrix with Long Inputs and Outputs

316 views 4 replies 2 participants last post by  peterclones 
#1 ·
I'm wondering if there's a 4x2 or 4x4 Matrix that can work well with a very long cable on one of the inputs? I want to run my computer from one room to the matrix in my home theater room, about 40ft in length. Then the 2 outputs are long as well, with about 25ft to TV and 20ft to projector. HDBaseT is a bit pricey and would rather go HDMI for now if possible. Will be installing Redmere cables all around. Monoprice advises against long inputs on Matrix, at least with their products.

Is there a Matrix box out there that can accomplish this?
 
#4 ·
The "concern" with long cables is signal quality by the time it reaches the matrix, especially on the control lines. The Redmere cables compensate for this. It should work just fine.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top