Originally Posted by t_f_s
Saved and printed for when the remote comes. Thanks!
Try this link for the manual to the 20.1 learning remote. Page 25 will walk you through it.
A couple of comments from my experience getting this set up.
When you learn the DVR+ in the AUX mode of the 20.1 remote, one small annoyance is that the volume and mute buttons will not default to the TV when you push them. You first have to push the TV mode before these buttons will work and then press back to the AUX mode to control the DVR+.
To fix this problem and have the volume and mute buttons default to the TV when in AUX mode, I did the following steps.
1) program the 20.1 to control your TV in the TV mode.
2) program the 20.1 to control any random DVD/BLU-Ray code in AUX mode. Page 11.
3) then program the 20.1 remote to control the DVR+ in the AUX mode following the instructions on page 25. In step 4 DO NOT PUSH RECALL, but rather skip straight to the record step.
4) get ready to repeat steps 5 and 6 until the 20.1 has learned all the buttons from the DVR+ remote. Don't stop until you get all the buttons or you will have to start over.
Hope this helps.