Pioneer Elite Pro-510 problem - Page 99 - AVS | Home Theater Discussions And Reviews
Forum Jump: 
Reply
 
Thread Tools
post #2941 of 2950 Old 10-05-2014, 11:51 AM
AVS Special Member
 
Mr Bob's Avatar
 
Join Date: Jan 2000
Location: San Francisco Bay Area/San Lorenzo, CA., USA
Posts: 9,556
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 86
If you have not retried it after your short resoldering jaunt, I think we can trust that it is still OK. If you made any mistakes then go to try it out, as soon as you power it up damage could be caused.

If it stayed on and didn't go into protection while losing video, that is one of the things that happens with this cold solder joint issue. I have had that happen on way more than a dozen boards, and 100% of the time my resoldering protocol has fixed it permanently.

Don't give up on it. Send that board to me, pay the money, get it fixed and don't go out and buy new, where you'll spend much, much more money and it won't last half as long as yours already has.

b

Robert Jones
Image Perfection
510-278-4247
650-333-4808 cell
bob at imageperfection dot com
www.projectiontvtroubleshootingadvice.com
YouTube channel: mrbobbigscreen

Mr Bob is online now  
Sponsored Links
Advertisement
 
post #2942 of 2950 Old 11-03-2014, 06:26 PM
Newbie
 
Len44's Avatar
 
Join Date: Jan 2013
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
ANNOUNCEMENT: I’ve convinced Bob Jones to come to the East Coast (Greater Baltimore-Washington DC Metropolitan Statistical Area). Bob will be here the week of November 17th to resurrect and tweak out my Mitsubishi WS-73909 set that I have sorely missed watching the past few months.

For those of you in the area, this might be a great opportunity to “piggyback” on his trip and ask Bob to apply his special magic to their CRTs. Everyone should feel free to check in with him to see if he can flex his travel arrangements and improve their viewing experience.

Looking so forward to mid-November!
Len44 is offline  
post #2943 of 2950 Old 11-04-2014, 01:26 AM
AVS Special Member
 
Mr Bob's Avatar
 
Join Date: Jan 2000
Location: San Francisco Bay Area/San Lorenzo, CA., USA
Posts: 9,556
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 86
So am I, Len!

Owners, please join us and allow me to get some more calibrations and optics cleanings in while I am there.

I don't work on just CRTs, I also do OLED and calibrate 1080->4K upconvsersion. And all projection modalities eventually need optics cleanings, esp. DLP.

b

Robert Jones
Image Perfection
510-278-4247
650-333-4808 cell
bob at imageperfection dot com
www.projectiontvtroubleshootingadvice.com
YouTube channel: mrbobbigscreen


Last edited by Mr Bob; 11-07-2014 at 08:50 AM.
Mr Bob is online now  
post #2944 of 2950 Old 11-16-2014, 01:02 PM
AVS Special Member
 
Mr Bob's Avatar
 
Join Date: Jan 2000
Location: San Francisco Bay Area/San Lorenzo, CA., USA
Posts: 9,556
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 86
Just a reminder, I fly out to Balt/WADC tomorrow, to repair and calibrate a Mit 73909 for Len, an owner in MD. At present I fly back on Thursday but would love to stay back East for a few more days instead, and calibrate a few more displays. Or do optics cleaning on any projection system, as they all need it eventually, not just CRT.

Or change out a lamp, or a DMD chip with black or white dots. Or cure a convergence problem.

Let me know as much ahead of time as you can, if you're interested. At present I fly back on Thursday but would love to stay back East for a few more days instead, and calibrate a few more displays.

b

Robert Jones
Image Perfection
510-278-4247
650-333-4808 cell
bob at imageperfection dot com
www.projectiontvtroubleshootingadvice.com
YouTube channel: mrbobbigscreen


Last edited by Mr Bob; 11-16-2014 at 01:11 PM.
Mr Bob is online now  
post #2945 of 2950 Old 11-22-2014, 01:27 PM
Newbie
 
Len44's Avatar
 
Join Date: Jan 2013
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
WOW!!! Just as a follow-up, just had my visit with Mr. Bob Jones, who worked tirelessly for two full (at least 12 hour) days on my Mitsubishi 73909.

Picture is like never before -- absolutely perfect (ah, yes -- Image Perfection. Now I get it!). The application of his knowledge and skills brought out the full potential of this set, and I am truly appreciative. Believe me, I have spent a goodly amount of time today watching all manner of movies, sports, etc thoroughly enjoying the superior picture I had been missing. I am sure that much of what he did would never even occur to 99 percent of others. And, I think he was a bargain.

I understand he has another engagement or two here on the East Coast -- not sure when he now plans to return to California, just know that he extended his trip here for a few more days. Get him if you can!

Anyway, Highly Recommended. Just wanted to take a moment to give credit where it is due.
Len44 is offline  
post #2946 of 2950 Old 11-23-2014, 02:29 AM
AVS Special Member
 
Mr Bob's Avatar
 
Join Date: Jan 2000
Location: San Francisco Bay Area/San Lorenzo, CA., USA
Posts: 9,556
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 86
Had a ball, Len. Even tho this thread is primarily for Pioneer owners, the technology is the same in both cases, and getting it right matters in both cases. So I really appreciate that you commented on my work here. You can invite me over to do your set again any time you want! Loved it, and you were a great host.



b

Robert Jones
Image Perfection
510-278-4247
650-333-4808 cell
bob at imageperfection dot com
www.projectiontvtroubleshootingadvice.com
YouTube channel: mrbobbigscreen

Mr Bob is online now  
post #2947 of 2950 Old 01-07-2015, 10:58 AM
AVS Special Member
 
Mr Bob's Avatar
 
Join Date: Jan 2000
Location: San Francisco Bay Area/San Lorenzo, CA., USA
Posts: 9,556
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 86
Had to happen. After having fixed over 100 PS boards for the Pioneer Elite 510/610/710 series, I came across a repair near Sacramento that needed to happen and I had to sell my one good, perfectly operational PS board, the one I use for testing. I have 2 other boards that have been raided for parts, and am finding those parts hard to find. Does anyone out there have a broken power supply board for these sets, AWV 1795 or AWV 1808? They can even be physically cracked and broken, chances are that won't matter. The parts I need are just for the low voltage standby power section, they provide passive power for turn-on only. That's all that's missing.

If so I would be glad to pay the shipping to get them to me. All I need is some parts off of them.

b

Robert Jones
Image Perfection
510-278-4247
650-333-4808 cell
bob at imageperfection dot com
www.projectiontvtroubleshootingadvice.com
YouTube channel: mrbobbigscreen

Mr Bob is online now  
post #2948 of 2950 Old 02-23-2015, 10:51 AM
AVS Special Member
 
Mr Bob's Avatar
 
Join Date: Jan 2000
Location: San Francisco Bay Area/San Lorenzo, CA., USA
Posts: 9,556
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 86
I am going to Portland Oregon and surrounding areas for a week at the end of March. I would love to schmooze with fellow CRT RPTV afficianados while there. Please contact me directly - not by pm please, do it by email - so we can find each other once I am up there. Beaverton, Hillsboro (home of Planar, the new owner of Runco), Milwaukie, Vancouver, Oregon City, Lake Oswego, Wilsonville...

b

Robert Jones
Image Perfection
510-278-4247
650-333-4808 cell
bob at imageperfection dot com
www.projectiontvtroubleshootingadvice.com
YouTube channel: mrbobbigscreen

Mr Bob is online now  
post #2949 of 2950 Old Yesterday, 03:48 PM
Newbie
 
jdgorud's Avatar
 
Join Date: Nov 2006
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 11
Hello Mr. Bob,

As I told you offline, I have decided to offer my Pioneer Elite Pro-77 rear projection TV to anyone interested. I am hoping that a subscriber to this forum will acquire it so it will be used and tinkered with for years to come. It still works well and it has a classic black enamel cabinet. I have the original manuals for this TV and its remote. This unit has just been posted in the AVSForum classifieds, and is available free of charge to anyone who will pick it up at my home in Oakland, CA. Interested parties should contact me at jdgorud at yahoo dot com.

Thanks for suggesting that I should post this offer on the "Pioneer Elite Pro-510 problem" forum.
jdgorud is online now  
post #2950 of 2950 Old Yesterday, 08:00 PM
AVS Special Member
 
Mr Bob's Avatar
 
Join Date: Jan 2000
Location: San Francisco Bay Area/San Lorenzo, CA., USA
Posts: 9,556
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 86
Well guys, a PRO 77 is not HDready, but fully operational it was creme de le creme at the time, with that nice glossy piano black gold-trimmed finish that you can't find anywhere these days, at any price. It has the finest of lenticular screens, finest of lenses, finest of CRTs. It's a gem for anyone who needs a fully operational big screen for purposes other than HD movie watching, where we owners tend to want spectacular HD. This is not quite that, but for certain purposes just as good.

And for free.

This could be manning the role of the family baby sitter, it could be in a den or basement, it could even be for the big overflow room during sermons at a church, where people will be far enough away from it that whether it's HD or not really doesn't matter.

This set can be internally cleaned and thus restored to pristine crystalline brand new condition on its projection path, it can be calibrated on its grayscale and its image structure, and as I recall its sound system is pretty impressive too.

I am ready to bring this set up to its full potential once you get it, and Oakland is really not all that far away from me.

Give him a call, then give me a call.



b

Robert Jones
Image Perfection
510-278-4247
650-333-4808 cell
bob at imageperfection dot com
www.projectiontvtroubleshootingadvice.com
YouTube channel: mrbobbigscreen


Last edited by Mr Bob; Yesterday at 08:05 PM.
Mr Bob is online now  
Sponsored Links
Advertisement
 
Reply Rear Projection Units

Tags
Pioneer , Pioneer Brand , Pioneer Elite , Pioneer Elite Brand , Pioneer Electronics

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off