Now, the service menu for this model is unavailable so far. Can anyone tell me which of these settings I can safely adjust (to get rid of a red color bloom, for example) vs. the settings I should be very afraid of changing? I need to get rid of the usual red push, plus there's a noticeable red/orange bloom to the right of bright red/orange/yellow subjects. And the 16x9 image has a very slight bow at the top.
I did go in and reduce the red gain, and changed some of the vertical/horizontal size settings. Some of the network news crawls were only partly visible at the bottom of the screen.
Do any of the service menu settings affect focus or convergence on CRT tube hdtvs? It looks to me like green and red might be a bit too far down and to the right (which probably means it's the blue that's too high and to the left).
This is a couple of years old now but many of the settings are the same. Please, please, take the warning seriously. Write down all of the numbers if you intend to change the values.
Also, values are different from set to set, only use others as a guide.
Did I mention write down the values?;)
Good luck. Many of the suggested changes really do make a difference with colour and the like and they're relatively easy to correct. Geometry, however, is a different kettle of fish altogether.