I finally got it two days a go and I love it, way better than the optoma gt750e I tested before. I'm glad I was still under the return period, when these babies came back in stock.
I have a problem though. I have this projector connected through an Onkyo receiver. All the signals are passed perfectly, I have a U-Verse box, an apple tv and a PS3 connected. I change the source in the receiver, the projector picks it up after 3 seconds, no problem.
But last night, I was going to test the 3D with the Ps3, and I found out that the playstation won't recognize the display as being 3D capable. I changed the settings in the receiver (which is brand new, and it is 3D compatible), I made it pass the signal through, so there should be no conversion at all in the signal. But no matter what I did, the PS3 would never find the display to be 3D (I ran the display settings, chose HDMI, select Auto, found the 1080p as max resolution, as that's it, no questions about 3D).
I did this before with the gt750e, and the PS3 recognized it perfectly, so I know it is not the cable (I am using the exact same one). But the most confusing part is that if I unplug the HDMI that's coming from the projector to the receiver, and plug it in, straight into the PS3, I get No Signal
I connected it to the Apple TV and also, no signal, but if I connect it straight to the Cable box, it works and displays the signal!
Very strange, I don't know what could be wrong. I am going to try later tonight and connect the apple tv with a shorter cable (since it is easier to put that one up at the projector level) and see if it picks it up.
So those are my problems. Any idea what could be happening?