Audyssey auto-set up is not working properly. When I start the Audyssey Auto Setup MultEQ with microphone connected the front left speaker chirps 3 times "Now measuring main listening position......." then I get a message "Microphone None or Speaker None" Retry or Cancel.
Isn't the setup supposed to cycle through the Left Ctr Right Surrounds and Sub? Any thoughts on troubling shooting my issue?
The receiver is telling you that it can't hear anything. If you can hear sounds coming from the speaker, then either the microphone or its connection are defective. Sometimes a piece of crud gets into the microphone socket on the receiver which can be blown out using a can of compressed air. Don't blow into it yourself: saliva is corrosive.