Marantz SR7009 - AVS Forum
Forum Jump: 
 54Likes
Reply
 
Thread Tools
post #1 of 409 Old 06-09-2014, 09:00 PM - Thread Starter
wse
AVS Special Member
 
wse's Avatar
 
Join Date: Mar 2008
Location: USA
Posts: 6,725
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 372 Post(s)
Liked: 335
Here is the flagship of the range 2014 manufacturer, Marantz SR7009, a superb 11.2 amplifier with an output of 200 Watts into 6 ohms per channel. It has all new with 8 inputs and outputs HDMI 2.0, Wi-Fi, integrated Bluetooth, components audiophile high-end, high-precision master clock, the HDAM modules, a 4K/60 upscaling, a 13.2 preout output a 7.1 analog input, the Audyssey MultEQ XT32 Pro with a new, more precise micro, management of DSD native gapless playback, compatibility with future 3D codecs, etc.. Marantz Announces sound quality much higher than its other amplifiers ...

http://www.marantz.co.uk/DocumentMas...R7009_EN01.pdf

Marantz SR7009: 11.2 amp, DLNA, MultEQ XT32 Pro, HDMI 2.0, HDAM, ISF, AirPlay
SR7009 Marantz, flagship model of the range 2014 11 manufacturer embeds discrete power amplifiers with advertised power 200 watts into 6 ohms. It obviously supports all HD audio formats like DTS-HD, TrueHD and Prologic IIz offers modes, DTS-Neo: X, Audyssey DSX and MultiCh Stereo. As Denon and Pioneer, this model will be updated soon to manage new 3D audio codecs (everyone understood what it was, but the names of these codecs is embargoed).

This amp would have a rigorous construction with high precision master clock, internal dampers against interference and vibrations, HDAM modules (Hyper Dynamic Amplifier Module) circuit and Curent Feedback, high quality PDO MOSFET transistor, a DAC 192 / 24 and three 32-bit DSP, a lot of copper to assemble the elements, modules and components, connectors and screws. It is obviously the Audyssey automatic calibration MulEQ XT32 Audyssey Pro compatible derivatives Audyssey LFC Pro, Dynamic EQ and Dynamic Volume. with a more precise micro before. It also embeds a linear power supply with toroidal transformer.

This amp includes, too, a video scaler ADV8003 (upscaling 1080p Ultra HD), but here the upscaling UHD is possible until 60 im / s and offers configurable video postprocessing (sharpening and reducing noise). Finally, another novelty, we can now calibrate the signal through the ISF certification, rarely useful on an amp, but interesting for the limited color settings broadcasters.

This model manages the DSD Super Audio CD with native filter the DSD. Its connectivity is complete with ultra high quality connectors, and (on rare models that porix nowadays) 7.1 analog input with Pure Audio Mode therefore not (re) scanned. There is also a 13.2 PREOUT, 8 inputs (have a front) and 2 HDMI 2.0 compatible ARC, CEC, Deep Color, 3D and Ultra HD 1080/24p (Passthrough 2160p/60 and 2160p/24 upscaling, 30, 50 im and 60 / s). There are also 2 inputs Coaxial, 2 Optical, 2 inputs / 1 output YUV, 2 inputs / 1 output Composite, 4 RCA stereo, FM / AM antenna, Ethernet and USB, RS-232C ports, and 11 pairs of terminals including six assignable . And so, the little novelty in 2014, Wi-Fi and Bluetooth integrated through two antennas placed behind.

The network support is present with access to radios, multimedia and a little more sophisticated management than last year with the ability to play MP3, WMA, AAC, ALAC, FLAC 192 kHz / 24 bit DSD64 and 128 and AIFF via USB and streaming from a NAS, PC or MAC (UPnP) with management Gapless playback. It offers Windows 7 and 8 compatibility, access to vTuner, Spotify and Flickr Connect, and especially AirPlay to stream music and audio from movies from your PC, tablet or iPad iPhone. We can even connect its USB port directly to iDevices to play music (no composite to display photos or videos). Also note that a new Marantz Remote app App will be available there as well more advanced than before.

Technical characteristics of the Marantz SR7009:
- 11.2 amplifier compatible 3D and 4K
- 11 channels of discrete amplification:
- 11 x 200W (6ohm, 1kHz, 1% THD, 1ch driven)
- 11 x 165W (6ohm, 1kHz, 0.7% THD, 2ch driven)
- 11 x 125W (8ohm, 20Hz-20kHz, THD 0.08%)
- DTS HD Master, DTS 5.1, DTS ES, DTS 96/24, Dolby Digital Plus, Dolby TrueHD, Dolby Digital EX, Dolby Pro - Logic IIz, All Stereo, Auddysey DSX, DTS-NEO-X 11.2, and future 3D audio codecs
- MDAX2: improving lossy compressed audio streams
- 8 HDMI 2.0 and HDMI 2.0 inputs 3: ARC, Zone 2, 3D, Deep Color, xvColor, 1080/24p, CEC, & 4K Quad HD - -- Passthrough (2160p/60 4:4:4 and 10-bit, or 2160p / 24 and 12 bit 4:4:4)
- Pure Color: UHD 12-bit 4:4:4 and 24p (4:4:4 10-bit and 60 im / s)
- Sources 3/3 areas: ability to stream different connected via HDMI HDMI HDMI out + Zone 2 sources
- Compatible Remote Marantz bus
- Audyssey MultEQ XT32 (Audyssey Pro compatible), Dynamic Volume, Dynamic EQ, and CFL Pro
- New micro more accurate calibration
- HDMI Standby Pass through consistent 4K/60
- Video processor V8003 Analog Device AD: 1080p upscaling & Ultra HD 2160p/60, post-video processing customizable ISF Certification &
- Build quality and audio revised upwards
- High precision clock master, shocks and shield against interference
- 3 32-bit DSP, DAC 192/24, HDAM modules, circuit against current feedback
- Linear power supply with toroidal transformer and MOSFET transistor
- DLNA, AirPlay, Windows 7 and 8, UPnP
- With graphic OSD Setup Wizard HDMI output 1
- Management of DSD
- USB & UPnP: 192 khz FLAC, DSD128, AIFF, WAV 96 kHz, WMA, MP3, AAC, ALAC and Gapless playback
- DLNA 1.5: Network Streaming, Automatic Update, vTuner Internet Radio, Flickr, Spotify
- Made for iPad / iPod / iPhone: Direct connection via USB, Denon Remote App
- IP / RS232 control Control / network / app control Control
- Pure Audio Mode, and Direct MDAX2
- Wi-Fi and integrated Bluetooth (2 antennas to the rear): codec aptX
- 7.1 analog input and output PREOUT 13.2
- Optimization bass for the front speakers if used without subwoofer
- Front with two buttons (source volume)
- Consumption: 710W
- Programmable remote control with backlit digital display
da Choge likes this.

My humble Cinema
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by wse; 08-08-2014 at 12:42 PM.
wse is online now  
Sponsored Links
Advertisement
 
post #2 of 409 Old 06-15-2014, 08:30 AM
AVS Special Member
 
petetherock's Avatar
 
Join Date: Jun 2006
Location: Down Under
Posts: 1,106
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 84 Post(s)
Liked: 37
No Atmos?

I don't think the specs above are accurate. And there's no link to any website on this..

Last edited by petetherock; 06-27-2014 at 04:47 PM.
petetherock is offline  
post #3 of 409 Old 06-15-2014, 09:00 AM
Advanced Member
 
PeterK's Avatar
 
Join Date: Jun 2002
Location: The very wet, humid, muggy South !!
Posts: 551
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Liked: 51
Please re-read. Future 3D codecs will be supported. They are not allowed as I understand it to claim any Atmos features yet. The assumption is that the future 3D codecs include Atmos decoding.
PeterK is online now  
post #4 of 409 Old 06-16-2014, 06:47 PM
Advanced Member
 
steveting99's Avatar
 
Join Date: Jun 2011
Location: Hong Kong
Posts: 705
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked: 94
Quote:
Originally Posted by wse View Post


- USB & UPnP: 192 khz FLAC, DSD128, AIFF, WAV 96 kHz, WMA, MP3, AAC, ALAC and Gapless playback
- DLNA 1.5: Network Streaming, Automatic Update, vTuner Internet Radio, Flickr, Spotify
The ability to stream DSD files from the network NAS/phone app directly to the AVR would be really cool.

I'm wondering if the Audyssey XT32 pro kit is included with the AVR?

How much is the SR7009 going to cost?

Maranatz NR1504, Oppo BPD-93, MTV 7000D, LG LW6500, aTV, WDTV Live, Harmony 650 remote, KEF E301, MiniDSP(2x4), Rythmik F12G
steveting99 is online now  
post #5 of 409 Old 06-17-2014, 01:35 AM
Newbie
 
Join Date: Jun 2014
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked: 0
i like it very much,The assumption is that the future 3D codecs include Atmos decoding.thanks for your sharing [IMG]http://*******/BqayBL[/IMG]
mtvlookseei is offline  
post #6 of 409 Old 06-17-2014, 02:48 AM
585-645-1006
 
jdsmoothie's Avatar
 
Join Date: Sep 2007
Location: Orlando, FL
Posts: 44,490
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked: 1508
Quote:
Originally Posted by steveting99 View Post
The ability to stream DSD files from the network NAS/phone app directly to the AVR would be really cool.

I'm wondering if the Audyssey XT32 pro kit is included with the AVR?

How much is the SR7009 going to cost?
This is just marketing that is being used whenever you see the word PRO after the version of Audyssey on the AVR. It simply means that particular model is Audyssey Pro "capable" and that the Audyssey Pro kit can be used with it; however, the Audyssey Pro Kit is a separate purchase for $550 (kit) + $150 (license)/unit = $700 and uses whatever version of Audyssey is on the particular unit (ie. either XT or XT32).

---------------------------------
"JD" –
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
; shop.avscience.com ; 585-645-1006, AVScience - Authorized dealer AVRs, Speakers, etc. 

Mon - Fri: 10am – 10pm EST (Sat/Sun too if you leave message)
Call for pricing on Denon, Marantz, Yamaha, Def Tech, Atlantic Tech, Parasound
** Think the AVR is defective?  Reset the microprocessor 4-5 times. 

Last edited by jdsmoothie; 06-17-2014 at 02:58 AM.
jdsmoothie is offline  
post #7 of 409 Old 06-17-2014, 02:49 AM
Senior Member
 
cischico's Avatar
 
Join Date: Jul 2007
Location: Tokyo, Japan
Posts: 276
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Liked: 30
Quote:
Originally Posted by jdsmoothie View Post
The Audyssey Pro Kit is a separate purchase for $550 (kit) + $150 (license)/unit = $700
Do we have to buy the kit to get the license?
cischico is online now  
post #8 of 409 Old 06-17-2014, 02:59 AM
585-645-1006
 
jdsmoothie's Avatar
 
Join Date: Sep 2007
Location: Orlando, FL
Posts: 44,490
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked: 1508
^^
Not at all. When an installer comes in to do an Audyssey Pro calibration, the price they quote you will include the cost of their service and the cost of the license (~$400-$500), however, there are a number of members that have chosen to simply buy the kit themselves so they can do the calibration as many times as desired. Refer to the Owner's thread for more info ....

The Audyssey Pro Installer Kit Thread (FAQ in post #1)

---------------------------------
"JD" –
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
; shop.avscience.com ; 585-645-1006, AVScience - Authorized dealer AVRs, Speakers, etc. 

Mon - Fri: 10am – 10pm EST (Sat/Sun too if you leave message)
Call for pricing on Denon, Marantz, Yamaha, Def Tech, Atlantic Tech, Parasound
** Think the AVR is defective?  Reset the microprocessor 4-5 times. 

Last edited by jdsmoothie; 06-17-2014 at 03:02 AM.
jdsmoothie is offline  
post #9 of 409 Old 06-17-2014, 05:10 AM
AVS Special Member
 
petetherock's Avatar
 
Join Date: Jun 2006
Location: Down Under
Posts: 1,106
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 84 Post(s)
Liked: 37
JD, if you know a price on this or if there is a 4520 equivalent in the Marantz range, can you pm me?
Cheers

My gear & my blog:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

petetherock is offline  
post #10 of 409 Old 06-17-2014, 12:41 PM
AVS Special Member
 
KLee's Avatar
 
Join Date: Jun 2001
Posts: 1,713
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked: 11
I this is correct, this would be superior to the Denon X7200 which only has 9 amplified channels, no?
KLee is offline  
post #11 of 409 Old 06-17-2014, 04:36 PM
Newbie
 
quizzicus's Avatar
 
Join Date: Feb 2014
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked: 11
Quote:
Originally Posted by KLee View Post
I this is correct, this would be superior to the Denon X7200 which only has 9 amplified channels, no?
I doubt its accuracy. Some other sites give it 9 channels, and it has the same overall 710W consumption as its predecessor.
Cattledog likes this.
quizzicus is offline  
post #12 of 409 Old 06-17-2014, 05:52 PM
Advanced Member
 
steveting99's Avatar
 
Join Date: Jun 2011
Location: Hong Kong
Posts: 705
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked: 94
Quote:
Originally Posted by quizzicus View Post
I doubt its accuracy. Some other sites give it 9 channels, and it has the same overall 710W consumption as its predecessor.
710W is the maximum power draw of the SR7009. Assuming 45% is taken up by the transformer loss, audio/video processing, etc. that leaves about 390W available for the amps.

If driving just two channels, that works out to be a little under 200W per channel. This is a close match to Marantz's marketing figure of less than 1% distortion.

If all 9-channels are be driven (i.e. party mode) than the figure drops significantly to a little over 35W per channel...

All manufacturer's like to trumpet their high power rating for marketing purpose.

Maranatz NR1504, Oppo BPD-93, MTV 7000D, LG LW6500, aTV, WDTV Live, Harmony 650 remote, KEF E301, MiniDSP(2x4), Rythmik F12G
steveting99 is online now  
post #13 of 409 Old 06-21-2014, 05:24 AM
Advanced Member
 
kblee's Avatar
 
Join Date: Apr 2004
Location: Montgomery, IL
Posts: 980
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked: 37
Is there word on when this model will be available and if the MSRP will increase from its predecessor?

PSN = ChitownJackalope


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
kblee is offline  
post #14 of 409 Old 06-21-2014, 05:30 AM
585-645-1006
 
jdsmoothie's Avatar
 
Join Date: Sep 2007
Location: Orlando, FL
Posts: 44,490
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked: 1508
The Denon X4100W is increasing $100 over the X4000 so more than likely there will be a similar increase from the SR7008 of $100 for the SR7009 to $2099. The X4100W and X5200W are expected to be released in Aug so the SR7009 is likely to be released Sep/Oct timeframe.

---------------------------------
"JD" –
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
; shop.avscience.com ; 585-645-1006, AVScience - Authorized dealer AVRs, Speakers, etc. 

Mon - Fri: 10am – 10pm EST (Sat/Sun too if you leave message)
Call for pricing on Denon, Marantz, Yamaha, Def Tech, Atlantic Tech, Parasound
** Think the AVR is defective?  Reset the microprocessor 4-5 times. 
jdsmoothie is offline  
post #15 of 409 Old 06-21-2014, 05:39 AM
585-645-1006
 
jdsmoothie's Avatar
 
Join Date: Sep 2007
Location: Orlando, FL
Posts: 44,490
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked: 1508
Quote:
Originally Posted by KLee View Post
I this is correct, this would be superior to the Denon X7200 which only has 9 amplified channels, no?
As is often the case, some EU sites get it right and some don't. Better to wait for US specs to be posted.

---------------------------------
"JD" –
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
; shop.avscience.com ; 585-645-1006, AVScience - Authorized dealer AVRs, Speakers, etc. 

Mon - Fri: 10am – 10pm EST (Sat/Sun too if you leave message)
Call for pricing on Denon, Marantz, Yamaha, Def Tech, Atlantic Tech, Parasound
** Think the AVR is defective?  Reset the microprocessor 4-5 times. 
jdsmoothie is offline  
post #16 of 409 Old 06-21-2014, 09:52 AM
Senior Member
 
csan's Avatar
 
Join Date: Aug 2006
Location: by the sea...
Posts: 381
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked: 218
The SR 5009 has been officially released (http://www.marantz.de/de/products/pa...oductid=sr5009 ), so I guess in short time we´ll have proper specs of the SR 7009
csan is offline  
post #17 of 409 Old 06-23-2014, 02:48 PM
AVS Special Member
 
petetherock's Avatar
 
Join Date: Jun 2006
Location: Down Under
Posts: 1,106
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 84 Post(s)
Liked: 37
Any ETA on this amp so far?
Third quarter or later?
petetherock is offline  
post #18 of 409 Old 06-23-2014, 04:23 PM - Thread Starter
wse
AVS Special Member
 
wse's Avatar
 
Join Date: Mar 2008
Location: USA
Posts: 6,725
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 372 Post(s)
Liked: 335
Quote:
Originally Posted by csan View Post
the sr 5009 has been officially released (http://www.marantz.de/de/products/pa...oductid=sr5009 ), so i guess in short time we´ll have proper specs of the sr 7009
atmos ?

My humble Cinema
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wse is online now  
post #19 of 409 Old 06-23-2014, 04:56 PM
Senior Member
 
csan's Avatar
 
Join Date: Aug 2006
Location: by the sea...
Posts: 381
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked: 218
Hi WSE. No Atmos on the SR 5009.

DTS HD Master / DTS ES / DTS 96/24
Dolby TrueHD / Dolby Digital EX / Pro Logic IIx
Dolby Pro Logic IIz
Multi-channel stereo

I do not know if the Atmos compatibility could be achieved by any future firmware update. Probably not. Otherwise they´d do some marketing through...
csan is offline  
post #20 of 409 Old 06-23-2014, 05:15 PM
585-645-1006
 
jdsmoothie's Avatar
 
Join Date: Sep 2007
Location: Orlando, FL
Posts: 44,490
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked: 1508
Quote:
Originally Posted by wse View Post
atmos ?
The Denon X4100W will be the lowest Atmos model, so the SR7009 is likely also to be the lowest Marantz model.

---------------------------------
"JD" –
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
; shop.avscience.com ; 585-645-1006, AVScience - Authorized dealer AVRs, Speakers, etc. 

Mon - Fri: 10am – 10pm EST (Sat/Sun too if you leave message)
Call for pricing on Denon, Marantz, Yamaha, Def Tech, Atlantic Tech, Parasound
** Think the AVR is defective?  Reset the microprocessor 4-5 times. 
jdsmoothie is offline  
post #21 of 409 Old 06-23-2014, 05:17 PM
585-645-1006
 
jdsmoothie's Avatar
 
Join Date: Sep 2007
Location: Orlando, FL
Posts: 44,490
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked: 1508
Quote:
Originally Posted by csan View Post
Hi WSE. No Atmos on the SR 5009.

DTS HD Master / DTS ES / DTS 96/24
Dolby TrueHD / Dolby Digital EX / Pro Logic IIx
Dolby Pro Logic IIz
Multi-channel stereo

I do not know if the Atmos compatibility could be achieved by any future firmware update. Probably not. Otherwise they´d do some marketing through...
No future firmware update on the lower models, as the Atmos AVRs require a minimum of 4 processors for Audyssey and Atmos to work together. The lower models only have a single processor.

---------------------------------
"JD" –
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
; shop.avscience.com ; 585-645-1006, AVScience - Authorized dealer AVRs, Speakers, etc. 

Mon - Fri: 10am – 10pm EST (Sat/Sun too if you leave message)
Call for pricing on Denon, Marantz, Yamaha, Def Tech, Atlantic Tech, Parasound
** Think the AVR is defective?  Reset the microprocessor 4-5 times. 
jdsmoothie is offline  
post #22 of 409 Old 06-23-2014, 08:31 PM - Thread Starter
wse
AVS Special Member
 
wse's Avatar
 
Join Date: Mar 2008
Location: USA
Posts: 6,725
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 372 Post(s)
Liked: 335
Quote:
Originally Posted by jdsmoothie View Post
No future firmware update on the lower models, as the Atmos AVRs require a minimum of 4 processors for Audyssey and Atmos to work together. The lower models only have a single processor.
Four processors! that's really good more computing power

My humble Cinema
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wse is online now  
post #23 of 409 Old 06-24-2014, 09:20 PM
Member
 
gotcory's Avatar
 
Join Date: Feb 2009
Location: SoCal
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked: 11
Quote:
Originally Posted by jdsmoothie View Post
This is just marketing that is being used whenever you see the word PRO after the version of Audyssey on the AVR. It simply means that particular model is Audyssey Pro "capable" and that the Audyssey Pro kit can be used with it; however, the Audyssey Pro Kit is a separate purchase for $550 (kit) + $150 (license)/unit = $700 and uses whatever version of Audyssey is on the particular unit (ie. either XT or XT32).
JD, what about Sub EQ HT? I noticed that was dropped from the features/specs going into the 7009. I hope the 2 sub outputs continue to be discretely adjusted for phase and level as with 7008 model. I also noticed that I no longer see Sub EQ on the Audyssey web page. Is this now included in XT32 or perhaps performed by the receiver outside of (before) Audyssey?

Thanks in advance.
gotcory is online now  
post #24 of 409 Old 06-25-2014, 05:41 AM
585-645-1006
 
jdsmoothie's Avatar
 
Join Date: Sep 2007
Location: Orlando, FL
Posts: 44,490
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked: 1508
^^
AFAIK, Sub EQ HT is still a feature on the new XT32 models. As a reminder, the information provided on the European websites is not always accurate.

---------------------------------
"JD" –
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
; shop.avscience.com ; 585-645-1006, AVScience - Authorized dealer AVRs, Speakers, etc. 

Mon - Fri: 10am – 10pm EST (Sat/Sun too if you leave message)
Call for pricing on Denon, Marantz, Yamaha, Def Tech, Atlantic Tech, Parasound
** Think the AVR is defective?  Reset the microprocessor 4-5 times. 
jdsmoothie is offline  
post #25 of 409 Old 06-25-2014, 09:20 AM
mnc
AVS Special Member
 
mnc's Avatar
 
Join Date: Mar 2003
Location: Dallas, GA
Posts: 1,663
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked: 60
Quote:
Originally Posted by wse View Post
Four processors! that's really good more computing power
I wonder how hot these will run!

NHT speakers, Denon 4520, 65VT50
mnc is offline  
post #26 of 409 Old 06-25-2014, 09:31 AM
AVS Special Member
 
petetherock's Avatar
 
Join Date: Jun 2006
Location: Down Under
Posts: 1,106
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 84 Post(s)
Liked: 37
I wonder if the 7009 can handle 9 or 11 channels (like the Denon 4520)?

My gear & my blog:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

petetherock is offline  
post #27 of 409 Old 06-25-2014, 06:03 PM
Advanced Member
 
steveting99's Avatar
 
Join Date: Jun 2011
Location: Hong Kong
Posts: 705
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked: 94
^petetherock,

Post #1 from AVS member wse has some preliminary data for the SR-7009 and it does look like an 11-channel processor + 11 amp receiver. This is yet to be finalized of course, but it looks to be what I'm looking for as the next up-grade from the NR-1504. I do like the feature set offered by Marantz and the brand has a good reputation on reliability.

Maranatz NR1504, Oppo BPD-93, MTV 7000D, LG LW6500, aTV, WDTV Live, Harmony 650 remote, KEF E301, MiniDSP(2x4), Rythmik F12G
steveting99 is online now  
post #28 of 409 Old 06-26-2014, 12:34 AM
AVS Special Member
 
petetherock's Avatar
 
Join Date: Jun 2006
Location: Down Under
Posts: 1,106
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 84 Post(s)
Liked: 37
Thanks Steve, but I am not sure how accurate that post is?
Eg it mentions 11 channels of amp, a toroidal transformer etc... but it seems that this amp is a 9 amp, 11 channel capable amp with 710w of energy consumption..

Honestly, I wish there was a 4520 / 7200 like Marantz ...

I have used the SR 19, 18 and 12 and I am keen to get back to the Marantz sound... nothing wrong with the Denon in HT (fabulous), but in music, it's not what I want...

I am also hoping it will switch on and off my PM 11 S3 ...

My gear & my blog:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

petetherock is offline  
post #29 of 409 Old 06-26-2014, 12:58 AM
Advanced Member
 
steveting99's Avatar
 
Join Date: Jun 2011
Location: Hong Kong
Posts: 705
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked: 94
^petetherock,

Will have to await the official release from Marantz to get all the juicy details. I believe JDsmoothie / batpig will provide updates along the way to keep me (and others) interested this unit.

I'm seriously thinking of up-grading from the Marantz NR-1504.

Maranatz NR1504, Oppo BPD-93, MTV 7000D, LG LW6500, aTV, WDTV Live, Harmony 650 remote, KEF E301, MiniDSP(2x4), Rythmik F12G
steveting99 is online now  
post #30 of 409 Old 07-16-2014, 06:08 AM
mnc
AVS Special Member
 
mnc's Avatar
 
Join Date: Mar 2003
Location: Dallas, GA
Posts: 1,663
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked: 60
Still no info?

NHT speakers, Denon 4520, 65VT50
mnc is offline  
Reply Receivers, Amps, and Processors

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off