AVS Forum banner

MARANTZ SR7010 owners

Tags
sr7010
78K views 382 replies 103 participants last post by  ON IN II 
#1 ·
Marantz SR7010

The flagship of the SR-Series is the new Marantz SR7010. It provides nine channels, and a signal processing up to 11.2. Thus Dolby Atmos is 7.1.4 no problem. The 200-watt output power and three HDMI outputs you get from September for 1699, - Euro or $:eek:


All nine-channel and above amplifiers support Dolby Atmos and DTS:X and Auro 3D.

HDCP 2.2 and HDMI 2.0a are on board ensuring the AV amps are ready for 4K Ultra HD video.


Elsewhere there's a continued focus on stereo and multi-channel music performance, a new remote app and set up assistant, plus "class-leading" support for 3rd party control for the custom install market.
 
See less See more
1
#4 ·
Since this receiver support 13.2 pre-out I am wondering if 9.2.4 is possible when adding a stereo amplifier.
From 7.2.4 to 9.2.4 should be created by generating front wide channels by DSP or am I wrong?
Sorry, but no. Atmos 7.2.4 (ie. 11CH processing) is the max configuration on any consumer model
 
#7 · (Edited)
En Français

Voici le fleuron de la gamme 2015 du constructeur, le Marantz SR7010, un superbe amplificateur 9.2 doté d’une puissance de 200 Watts sous 6 Ohms par canal, mais évidemment très proche de son prédécesseur SR7009. Comme les autres modèles, les nouveautés concernent la compatibilité HDCP 2.2, le DTS:X (en plus du Dolby Atmos déjà présent l’an dernier), et une mise à jour prochaine pour apporter l’Auro 3D. L’électronique a subit quelques petites améliorations comme la présence d’un nouveau DAC 32 bits, et d’un DSP Quad Core plus puissant. Il dispose 8 entrées et sorties HDMI 2.0 (upgradables en HDMI 2.0a), le Wi-Fi et Bluetooth intégré, des composants audiophiles haut de gamme, une horloge maître haute précision, des modules HDAM, un upscaling 4K/60, une sortie PreOut 13.2 assignable, une entrée analogique 7.1, l’Audyssey MultEQ XT32 Pro optimisé pour l’audio 3D avec le micro plus précis sortie l’an dernier, la gestion du DSD natif, la lecture gapless, etc.

Marantz SR7010 : ampli 9.2, Dolby Atmos, DTS:X, MultEQ XT32 Pro, HDMI 2.0, HDCP 2.2

Le Marantz SR7010, modèle phare de la gamme 2015 du constructeur embarque 9 amplificateurs de puissance discrets avec une puissance annoncée à 200 Watts sous 6 Ohms. Il gère évidemment tous les formats audio HD comme le DTS-HD et DTS:X 11.1, Dolby TrueHD et Atmos 7.2.4 (en ajoutant un bloc stéréo en PreOut) propose les modes Prologic IIz, DTS-Neo:X, Audyssey DSX, et MultiCh Stéréo, DTS Neural-X 11.2. Comme chez Denon, ce modèle sera mis à jour bientôt pour gérer l’Auro 3D et pour passer en HDMI 2.0a.

Cet ampli disposerait d’une construction rigoureuse avec une horloge maitre haute précision, des amortisseurs internes contre les interférences et vibrations, des modules HDAM (Hyper Dynamic Amplifier Module) et circuit Curent Feedback, de AOP haute qualité, transistor MOFSET, un nouveau DAC 192 kHz/32 bits et trois DSP 32 bits et un nouveau DSP Quad Core pour gérer les tâches plus complexes comme les fonctions Audyssey optimisées pour l’audio 3D, pas mal de cuivre pour assembler les éléments (cartes et composants, connecteurs et vis). On trouve évidemment la calibration automatique Audyssey MulEQ XT32 compatible Audyssey Pro et Audio 3D et ses dérivés Audyssey LFC Pro, Dynamic EQ et Dynamic Volume avec le micro plus précis sorti l’an dernier qui permet de gérer également l’axe de la hauteur. Il embarque également une alimentation linéaire avec transformateur torique pour les cartes analogiques.

Cet ampli intègre, lui aussi, un scaler vidéo ADV8003 (upscaling 1080p et Ultra HD en 60 im/s) qui propose un post-traitement vidéo paramétrable (accentuation de la netteté et réducteur de bruit). Enfin, on peut désormais calibrer le signal grâce à la certification ISF, rarement utile sur un ampli, mais intéressant pour les diffuseurs limités en réglages colorimétriques.

Ce modèle gère le DSD du Super Audio CD avec un filtrage natif du DSD. Sa connectique est ultra complète avec des connecteurs de qualité, et une entrée analogique 7.1 (assez rare de nos jours) avec un mode Pure Audio donc non (re)numérisé. On trouve également une PreOut 13.2 assignable, 8 entrées (ont une en façade) et 2 sorties HDMI 2.0 compatibles ARC, CEC, Deep Color, 3D, 1080/24p et Ultra HD (Passthrough 2160p/60 et upscaling 2160p/24, 30, 50 et 60 im/s). Cette année, toutes les entrées HDMI et 1 sortie sont compatibles HDCP 2.2. On trouve également 2 entrées Coaxial, 2 Optique, 2 entrées/1 sortie YUV, 2 entrées/1 sortie Composite, 4 RCA stéréo, Antenne FM/AM, ports Ethernet et USB, RS-232C, et 11 paires de borniers dont six assignables. Et donc, comme l’an dernier, le Wi-Fi et Bluetooth sont intégrés grâce à deux antennes placées derrière.


La prise en charge réseau est présente avec l’accès aux webradios, et une gestion multimédia avec la possibilité de lire du MP3, WMA, AAC, ALAC, FLAC en 192 kHz/ 24 bits, DSD64 et 128 et AIFF via USB et en streaming depuis un NAS, PC ou MAC (UPnP) avec gestion de la lecture Gapless. Il propose la compatibilité Windows 7 et 8, l’accès à vTuner, Flickr et Spotify Connect, et surtout l’AirPlay pour streamer la musique et l’audio des films depuis votre PC, tablettes iPad ou iPhone. On peut même connecter ses iDevices au port USB directement pour lire la musique (pas de composite pour afficher les photos ou vidéos). Notez également qu’une nouvelle application Marantz Remote App sera proposée, là aussi plus évoluée qu’avant.

Caractéristiques techniques du Marantz SR7010:


  • Amplificateur 9.2 compatible 3D et 4K
  • 9 canaux d’amplification discrets :
    • 9 x 200W (6ohm, 1kHz, THD 1%, 1ch driven)
    • 9 x 165W (6ohm, 1kHz, THD 0.7%, 2ch driven)
    • 9 x 125W (8ohm, 20Hz-20kHz,THD 0.08%)
  • DTS HD Master Audio, DTS:X 11.2, DTS 5.1, DTS ES, DTS 96/24, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos 7.2.4, Dolby Digital EX, Dolby Pro Logic IIz, All Stéréo, Auddysey DSX, DTS-NEO-X 11.2, DTS-Neural:X 11.2
  • Futures mises à jour pour Auro 3D, HDMI 2.0a
  • MDAX2 : amélioration des flux audio compressés lossy
  • 8 entrées HDMI 2.0 et 3 sorties HDMI 2.0 : HDCP 2.2, ARC, Zone 2, 3D, Deep Color, xvColor, 1080/24p, CEC, 4K & Quad HD Passthrough (2160p/60 en 4:4:4 et 8 bits, ou 2160p/24 en 4:4:4 12 bits)
  • 3 Sources / 3 Zones : possibilité de diffuser différentes sources connectées en HDMI via HDMI out + HDMI Zone 2
  • Compatible bus Remote Marantz
  • Audyssey MultEQ XT32 (compatible Audyssey Pro), Dynamic Volume, Dynamic EQ,et LFC Pro, gestion des formats audio 3D
  • Headphone EQ
  • Micro de calibration plus précis fourni
  • Standby HDMI Pass through compatible 4K/60
  • Processeur Video Analog Device AD V8003 : upscaling 1080p & Ultra HD 2160p/60, post-traitement vidéo paramétrable & Certification ISF
  • Qualité de construction et audio revue à la hausse
  • Horloge maitre haute précision, amortisseurs et bouclier contre les interférences
  • 3 DSP 32 bits , DAC 192/32, DSP Quad Core, modules HDAM, circuit à contre-réaction en courant
  • Alimentation linéaire avec transfo toroïdal et transistor MOFSET
  • Compatible DLNA, AirPlay, Windows 7 et 8, UPnP
  • OSD graphique amélioré avec assistant de configuration sur la sortie HDMI 1
  • Gestion du DSD
  • USB & UPnP : FLAC 192 khz, DSD128, AIFF, WAV 96 kHz, WMA, MP3, AAC, ALAC et lecture Gapless
  • DLNA 1.5 : Network Streaming, mise à jour auto, Radios internet vTuner, Flickr, Spotify
  • Made for iPad/iPod/iPhone : connexion directe via USB, Application Denon Remote
  • Contrôle IP/ Contrôle RS232 / Contrôle réseau / appli contrôle
  • Mode Pure audio, Direct et MDAX2
  • Wi-Fi et Bluetooth intégrés (2 antennes à l’arrière) : codec aptX
  • Entrée analogique 7.1 et Sortie PreOut 13.2
  • Optimisation des fréquences graves pour les enceintes frontales si utilisation sans caisson de grave
  • Façade avant avec deux boutons (source, volume)
  • Consommation : 710W
  • Télécommande programmable avec écran digital rétroéclairé
  • Nouveau mode ECO et nouvelle application
http://www.avcesar.com/actu/id-17169/marantz-sr7010-92-dolby-atmos-712-dtsx-111.html
 
#9 ·
The 200-watt output power and three HDMI outputs you get from September for 1699, - Euro or $:eek:
I think it's around £1,699 in the UK too, so between 30 and 50% more expensive depending on exchange rate. :mad: I think that for me it'll be between this and the 6200 as although I have a 7 channel power amp (Arcam P7) if I go for an AVR I'll be able to use the internal amps for the 4 height channels and my better power amp (and miniDSP DDRC88A) for the 'main' 7 channels.

I don't mind there being a separate thread for this AVR as a single thread tends to get very long, very quickly. Perhaps selfishly, I'm not interested in the lower tier models in the 'main' thread anyway, though I do own an NR1605 I've bought it recently so I'm not likely to upgrade it for an NR1606.
 
#12 ·
I don't know...I answer questions about the NR1605/1606 elsewhere, so if I got a 7010 I'm sure I'd be answering questions on that too. :) They aren't necessarily questions that relate to the more powerful models too, so there is some benefit from separate threads IMHO.
 
#13 ·
Always the same weakness on the denon and marrantz ,are only true 9 chanels ,I kept my onkyo tx-nr 3030 this receptor av have 11 discret true chanels ,you need nothing for make 11 chanels .
 
#15 ·
(JDSMOTHIE)
I pay my onkyo tx3030 2,200 dollars ,not 5000 dollars.
 
#16 ·
After my 818 it'll take more than a couple of extra built in power amps to dissuade me from looking at Marantz or Denon for my next AVR. :rolleyes:

I use a separate (better quality/higher output) power amp anyway, so the extra 4 power amp channels I need are already included and are good enough for the less critical Atmos ceiling channels anyway. So long as whichever AVR I buy can process 7.1.4 and allow the above power amp configuration, then I'll focus on buying something that doesn't sound like nails on a blackboard to me...
 
#19 ·
Well I am almost complete with my HT upgrading. Acquired a 3D, 4K TV, a matching subwoofer for my existing, two height speakers, and an Oppo 103D. The only item missing was an updated Receiver. Now I have just pre-ordered the Marantz SR7010. The pre-order price was $1,650 and while MSRP has not yet been announced, I believe my cost will end up being a good deal/value. Can't wait to receive it, whenever that is.
 
#36 ·
Disappointed to see that Marantz are no longer using toroidal transformers in their receivers, and nor are Denon. I've been thinking about replacing my SR8002 but the 2015 flagships make me worry that I'd be experiencing a sonic step down from what I've already got.

Is there a reason they're going without toroidal power now? It seems that the only way to get it in 2015 would be to go via costly separates (the stunning AV8802 etc).

I absolutely love the sound of my SR8002 and am only looking to upgrade for the sake of 3D and 4K pass-through, network / streaming, Atmos etc.
 
#38 ·
I believe I wrote a reply to a similar question like in the Denon 7200 thread:

"It's all about cost, and the first thing to give in the current economy is the power section.
Toroidals cost $$, and most consumers won't notice.
It's only a AVR after all, so one cannot expect it to give the same results as a solid power amp.
These days, consumers want all the features but do not want a price increase. So what is compromised is the power section, which is something many consumers do not notice, especially when they look at the specs and see "wow, it has nine channels of 160W per channel".

Not too many reviewers measure the power supply too, and amps change so often, it seems we won't be seeing a proper review of this amp during it's lifetime..

Even so, if it can generate half of it's rated power per channel, that should be enough for most mid-range HT speaker setups. After all most consumers don't run all the channels at the same volume, nor do they run their speakers full-range. Many have one or even two subs to help take the load off the amp."
 
#39 ·
Regardless what the 7010 is rated on paper or the test bench, I can attest the 7010 will rock the neighborhood as easy as the beloved 4520 did, every input reads the same volume level as before, not much difference at all in that respect, I say go for it and enjoy
 
#41 ·
AVForums should have one up in a few days as the reviewer has done the unboxing video and said the review should follow soon.
 
Top