I want to set up my crossover frequencies correctly for my front main, center and sub on my processor. I don't know what any of these frequencies mean. Here are my options on the onscreen menu:
The freq. specs for the mains are 30hz and 42khz
The center feq. specs are 48hz and 42khz
The sub freq. specs. are 17hz and 40/140hz
This is all greek to me. I just know the rears need to be at 100hz and if I have the x-over freq. wrong my imaging will suffer.
If this helps my current system consists of the following: B&W DM604S3, LCR600 S3, DM601S3, ASW675, Rotel RB1080 2ch 200W for the DM604S3( jumpers removed and all 4 posts are connected to the RB1080), Harmon Kardon 2ch 100W High current HK870 amp for the rear DM601S3 (jumpers in place), Harman Kardon High Current PA2400 2ch 175W For The LCR600S3 (the jumpers on the LCR600 were removed and 1 Channel is for the high ferq.& the other ch is connected to the low freq. of the x-over).
For processing I own a Rotel RSP1068.
My Dvd/Cd Player is a Sony DVPN9100ES. For power filtration I own a Monster power 3500MKII power center, and my display is a Pioneer Elite Pro1140 50" Plasma. All of my interconnects are Audiouest Diamondback cables, and all of my speaker wire is Audioquest Type 4 solid copper wire with banana plug terminals. My sub wire is an Audioquest Sub-1 cable with a y adapter going in to the sub's 2 inputs
Thanks in advance for all of your help