I'm just wondering if anyone has any specific brand emitters they like and haven't had any issues with. I plan on ordering my stuff from Amazon today and would like to find some on there if possible, that people have had success with. From reading the reviews it seems that some of them don't stick very well on the IR panels of the devices, so that is one area I'm wondering about as well.
Don't worry if they don't stick very well. Just break out the hot glue gun and they won't be going anywhere. You could also tape over them to hold them in place. If you use non-transparent tape you can also prevent IR bleed from other IR signals, but that usually isn't an issue unless you are running multiples of the same device.