I am a Crestron Integrator and I need to tie in a Devaliet System tomorrow.
However, the unit just comes with a BlueTooth remote so I cannot use a learner.
Their website has provided IR codes for control but this is no good for my programmer. None of the techs have a remote that is capable of spitting back out HEX commands (Marantz, etc)
so I was hoping maybe someone here had one and could help me out and post them back.
Here is the info on their website..
We use the RC5 code modulated at 38kHz which is probably the most common RC code. We support 2 addresses simultaneously - by default 0 and 16. You can modify the addresses through the online configuration tool. If you only need one address, simply duplicate it in the 2 address-lines i.e. 16 and 16 instead of 0 and 16.
Here is the list of commands currently supported along with their respective codes:
Thanks so much!