AVS Forum | Home Theater Discussions And Reviews - View Profile: michael hurd

michael hurd michael hurd is offline

AVS Forum Special Member

  About Me

  • Signature
    "What the heck was that crashing noise?" Me: "oh, just tossed the shampoo bottles off the shelf on the opposite side of the house. "

  Statistics

Total Posts
General Information
  • Join Date: 11-07-2007
  • Referrals: 0

  Mentions

05-20-2015
05:37 PM - notnyt mentioned michael hurd in post AE AV15 back in production
... was coming from. @michael hurd filled me in. Good...
04-09-2015
01:39 PM - lukeamdman mentioned michael hurd in post 3rd Annual Upper Midwest GTG July 2015 Discussion
...eredge88 kaiforce michael hurd BRAD S Jeff Perman...
01:38 PM - lukeamdman mentioned michael hurd in post 3rd Annual Upper Midwest GTG July 2015 Discussion
Reserved

  Thread Tags

No results to display...

  Quotes

02-22-2017
10:27 PM - Scott Simonian quoted michael hurd in post 8x 18" LMS 5400 Ultras Sealed to 27 Cube 15hz Ported Build
I think it'd still be over 1 ohm....
02-21-2017
05:11 PM - michael hurd quoted Face2 in post Built Larger Box, Lower Tuned and Got Port Resonance
Have you seen driver suspe...
05:04 PM - michael hurd quoted RickJames in post Built Larger Box, Lower Tuned and Got Port Resonance
In 1931.:rolleyes: If we'd adh...
09:05 AM - Face2 quoted michael hurd in post Built Larger Box, Lower Tuned and Got Port Resonance
It may be common practice, but it...
07:14 AM - RickJames quoted michael hurd in post Built Larger Box, Lower Tuned and Got Port Resonance
E. W. Kellogg in 1931 proposed 0....
02-20-2017
11:52 PM - michael hurd quoted Infrasonic in post Built Larger Box, Lower Tuned and Got Port Resonance
So i worked with what i had at ...
11:46 PM - michael hurd quoted Face2 in post Built Larger Box, Lower Tuned and Got Port Resonance
Depending on your listenin...
02-16-2017
05:43 PM - michael hurd quoted lukeamdman in post (8) Ported Incriminator Audio Judge 21" build
...ket.com/albums/l502/lukeamdman/Misc/9-2_zpsi5js68pb...
02-08-2017
05:49 AM - Bill Shenefelt quoted michael hurd in post Folks who have cut their own speaker cabinets, what kind of saw did you use?
Woodworking 101... wood moves wit...
02-07-2017
07:38 PM - michael hurd quoted Bill Shenefelt in post Folks who have cut their own speaker cabinets, what kind of saw did you use?
Buy some hardwood like poplar for b...
02-05-2017
12:19 PM - mmrogge quoted michael hurd in post Amplifier for passive Klipsch KW120 THX Sub
Not many people open up the wirin...
02-04-2017
09:34 PM - michael hurd quoted mmrogge in post Amplifier for passive Klipsch KW120 THX Sub
The wire is labeled 12/2 but...
04:32 PM - eng-399 quoted michael hurd in post DIYSG Titan-615 Build
Morning wood? :rolleyes: Reces...
04:27 PM - michael hurd quoted eng-399 in post DIYSG Titan-615 Build
haha ya those HTH kit's went...
01-03-2017
08:15 PM - rhodesj quoted michael hurd in post Sub Design Help: Plate Steel Sub Build
If you are going for the 'cool' f...
01-02-2017
07:17 PM - GTHill quoted michael hurd in post Sub Design Help: Plate Steel Sub Build
If you are going for the 'cool' f...
06:44 PM - michael hurd quoted GTHill in post Sub Design Help: Plate Steel Sub Build
I was thinking about this l...
06:28 PM - michael hurd quoted Agash Ugan in post Does an enclosure make a speaker sound better?
Hello, I would like to know if ...
12-05-2016
06:25 AM - seraph quoted michael hurd in post Dual SI BHS-24 Ported Design & Build
Low pressure / large surface area...
12-04-2016
05:21 PM - michael hurd quoted seraph in post Dual SI BHS-24 Ported Design & Build
These are being built insid...

  Reviews

michael hurd's Recent Reviews
This does not have any entries.