Quote:
Originally Posted by Jawhn /forum/post/14856146
What firmware version is the most stable? I will not use the timer.
Just published a new update - 2.9.5. The only difference between 2.9.4 and 2.9.5 is fixing the video mode magic sequence. DavCorn requested this a while back and I haven't had time to publish. So, If you are running 2.9.4, and don't need the set video mode magic sequence, then you do not really need to upgrade.
The latest and most stable version is 2.9.5. Beta versions are not published. If it is on the site below, then it is a release candidate.
http://www.mediafire.com/dogleg69
2.9.5 - 2008-10-13
-----
- Add magic sequences for people without orginal remote (specifically
the RCA RCR6373/RCR6473). In addition to (from 2.9.4):
Aspect: Press Exit/Clear, 0, 0, 1, OK/Enter
CC: Press Exit/Clear, 0, 0, 2, OK/Enter
Audio: Press Exit/Clear, 0, 0, 3, OK/Enter
Add/fix the cycle video mode magic sequence (it was broken in 2.9.4):
Video: Press Exit/Clear, 0, 0, 4, OK/Enter
The original code to cycle video mode still works too:
Video: Press USDTV Guide (usually red), Aspect, USDTV Guide
The way this works is that you press one of the above video sequences
and then press a number between 1 and 5 to select the
video mode you want. The following are the video modes:
1 - Composite/S-Video
2 - Component 480i
3 - Component 480p (HDTV)
4 - Component 720p (HDTV)
5 - Component 1080i (HDTV)
This allows you to select a video mode even if there is no menu on the
screen. It is handy if you change TV's or hookup
using a different outout and you forgot to set it before hand.