****UNDER NO CIRCUMSTANCE SHOULD THESE SETTINGS BE USED WITH ANY OTHER SOURCE MATERIAL BEYOND THE PANEL AGING THUMBDRIVE FILES****
Recommended 100 Hour Panel Aging settings for North American Panasonic TC-PxxS2/G20/G25/VT20/VT25 models (ONLY to be used with Evangelo2's Thumbdrive Files!!!!!!!!)
*****Note: This procedure is designed to equally and evenly age all pixels and ensure the reference settings listed below provide maximum satisfaction. This procedure is NOT designed nor recommended to be used as Image Retention and/or Burn-in prevention.*****
Photo Settings
Picture:
Picture Mode: Photo
Contrast: 100
Brightness: 50
Color: 75
Tint: 0
Sharpness: 50
Color Temp: Cool (Cool 2 on G20/25 and VT20/25 displays)
Note: These offsets must be entered for both Color matrixes. You access the different matrixes by using a 1080i/p signal for the HD matrix and 480i/p signal for the SD matrix. The WB Method Select option should be set to 00 instead of 03.
Calibration Report
AVS Panasonic TC-PxxS2 Post Calibration Report (Cinema).pdf 145.7607421875k . file
Note: These offsets must be entered for both Color matrixes. You access the different matrixes by using a 1080i/p signal for the HD matrix and 480i/p signal for the SD matrix. The WB Method Select option should be set to 00 instead of 03.
Picture:
Picture Mode: Custom
Contrast: 87
Brightness: 68
Color: 35
Tint: -3
Sharpness: 11
Color Temp: Warm2
Color Management: Off
x.v. Color: Off
Photo Enhancement: Off
C.A.T.S: Off
Video NR: Off
Blur Reduction: Off
Pro Settings:
W/B High R: 0
W/B High B: +2
W/B Low R: +2
W/B Low B: -4
Black Extension: 0
Gamma Adjustment: 2.2
Panel Brightness: Mid
Contour Emphasis: Off
AGC: 0
Advance Options
Block NR: Off
Mosquito NR: Off
Black Level: Light
3:2 Pulldown: On
Note: These settings must be used with the offsets listed for THX mode!!!!
Calibration Report
AVS Panasonic TC-PxxG20(25) Post Calibration Report (THX).pdf 144.78125k . file
AVS Panasonic TC-PxxG20(25) Post Calibration Report (Custom).pdf 147.10546875k . file
Note: These offsets must be entered for both Color matrixes. You access the different matrixes by using a 1080i/p signal for the HD matrix and 480i/p signal for the SD matrix. The WB Method Select option should be set to 00 instead of 03.
What's the difference between the 00 and 03 WB method? Is the 03 for HD?
Note: These offsets must be entered for both Color matrixes. You access the different matrixes by using a 1080i/p signal for the HD matrix and 480i/p signal for the SD matrix.
Picture:
Picture Mode: Custom
Contrast: 90
Brightness: 57
Color: 39
Tint: 0
Sharpness: 11
Color Temp: Warm2
Color Management: Off
x.v. Color: Off
Photo Enhancement: Off
C.A.T.S: Off
Video NR: Off
Blur Reduction: Off
Pro Settings:
W/B High R: 0
W/B High B: -1
W/B Low R: 0
W/B Low B: 0
Red Hue: 0 (VT25)
Green Hue: 0 (VT25)
Blue Hue: 0 (VT25)
Red Saturation: 0 (VT25)
Blue Saturation: 0 (VT25)
Green Saturation: 0 (VT25)
Black Extension: 0
Gamma Adjustment: 2.2
Panel Brightness: Mid
Contour Emphasis: Off
AGC: 0
Advance Options
Block NR: Off
Mosquito NR: Off
Black Level: Light
3:2 Pulldown: On
3D
Picture Mode: Custom
Contrast: 90
Brightness: 57
Color: 35
Tint: 0
Sharpness: 11
Color Temp: Warm2
Color Management: Off
x.v. Color: Off
Photo Enhancement: Off
C.A.T.S: Off
Video NR: Off
Blur Reduction: Off
Pro Settings:
W/B High R: -1
W/B High B: -5
W/B Low R: +8
W/B Low B: -2
(VT25)
Red Hue: 0 (VT25)
Green Hue: 0 (VT25)
Blue Hue: 0 (VT25)
Red Saturation: 0 (VT25)
Blue Saturation: 0 (VT25)
Green Saturation: 0 (VT25)
Black Extension: 0
Gamma Adjustment: 2.2
Panel Brightness: Mid
Contour Emphasis: Off
AGC: 0
Advance Options
Block NR: Off
Mosquito NR: Off
Black Level: Light
3:2 Pulldown: On
Note: These settings must be used with the offsets listed for THX mode!!!!
Calibration Report
AVS Panasonic TC-PxxVT20(25) Post Calibration Report (THX).pdf 130.7880859375k . file
AVS Panasonic TC-PxxVT20(25) Post Calibration Report (Custom).pdf 135.4853515625k . file
I'm expecting a 50G25 to arrive sometime next week. You've had the S2 for a little bit (Couple of week?!). When do you expect to get your hands on a G2X?
Look forward to reading your thoughts/impressions...
Sorry if this is a stupid question but why did you have your gamma target set at 1.9 for the S2?
Why not 2.22 or something close to that?
P.S. is it my idea or the cyan point was way off on a calibration report you posted some time ago? It doesn't look THAT bad now (or maybe I don't remember well...
Because the S2 is not capable of 2.2 and 2.2 is not the standard for gamma in the first place
Quote:
P.S. is it my idea or the cyan point was way off on a calibration report you posted some time ago? It doesn't look THAT bad now (or maybe I don't remember well...
Quote:
Originally Posted by PatEllis15 /forum/post/18252813
Thanks D-Nice.
I'm expecting a 50G25 to arrive sometime next week. You've had the S2 for a little bit (Couple of week?!). When do you expect to get your hands on a G2X?
Look forward to reading your thoughts/impressions...
I presume that when using the SD Card into to display Evangelo's images, the Display Interval setting for the SD Card Slideshow should be set to "Slow" (for 30 second intervals just like the DVD has).
Quote:
Originally Posted by RandyWalters /forum/post/18277321
I presume that when using the SD Card into to display Evangelo's images, the Display Interval setting for the SD Card Slideshow should be set to "Slow" (for 30 second intervals just like the DVD has).
D-Nice: Sorry this is off topic, but I want to be sure you see it. Your old Elite 1140 settings were fantastic! Please see this other thread for my call for help. Also sent you a PM. Thanks!
I see that you suggest to change the WB Method to 00 instead of 03. Can you expand on what this does exactly and if this is only for the S2?
This is the first I have seen that so I'm curious if this applies for the 12g panels as well? I own a 54V10 and I was recently entering offsets and mistakenly changed the WB method, I did correct it back to 03 but wasn't sure what effect this would have, if any.
Can you tell me if ther is any difference between G20 and G25 that would make me want to wait for one or the other. I know bout cam feature in G25 thats not avail on G20 but other than that are they same TV? I am thinking about buying the G25 tonight since the store only has that model and not G20?
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
AVS Forum
34M posts
1.5M members
Since 1999
A forum community dedicated to home theater owners and enthusiasts. Come join the discussion about home audio/video, TVs, projectors, screens, receivers, speakers, projects, DIY’s, product reviews, accessories, classifieds, and more!