AVS | Home Theater Discussions And Reviews - Search Results
Showing results 1 to 25 of 5000
Search took 7.61 seconds.
Search: Posts Made By: jdsmoothie
Forum: Receivers, Amps, and Processors   02-01-2015, 07:49 AM
Replies: 4
Views: 49
Posted By jdsmoothie
No. The hockey puck mics have a different...

No. The hockey puck mics have a different calibration curve than the tower mics.
Forum: Receivers, Amps, and Processors   02-01-2015, 07:45 AM
Replies: 997
Views: 125,207
Posted By jdsmoothie
^^ The following worked for a Denon owner with...

^^
The following worked for a Denon owner with the same issue:

Starting with the unit already powered up and (any) NETWORK source selected;
a. Verify from the unit's front panel display that the...
Forum: Receivers, Amps, and Processors   02-01-2015, 07:27 AM
Replies: 9
Views: 67
Posted By jdsmoothie
^^ Correct. No difference. Only use 60Hz or...

^^
Correct. No difference. Only use 60Hz or 80Hz crossover if the AVR set them as such after running Audyssey. Generally better to use default setting of LFE rather than LFE + MAIN (only used...
Forum: Receivers, Amps, and Processors   02-01-2015, 07:00 AM
Replies: 1
Views: 9
Posted By jdsmoothie
Spotify Connect is only featured on the 2014 and...

Spotify Connect is only featured on the 2014 and newer models. The 2013 1504 uses Spotify on board just as it uses Pandora.
Forum: Receivers, Amps, and Processors   02-01-2015, 06:55 AM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
Right. No. You will be increasing the...

Right.



No. You will be increasing the sub level of that one input by +3.5db or in other words would be the same as changing the Sub Test tone from -7.5db to -4.0db. Also note that when the...
Forum: Receivers, Amps, and Processors   02-01-2015, 06:47 AM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
Several members have posted in the Auro 3D thread...

Several members have posted in the Auro 3D thread they prefer using Auro-matic for music listening vs. Atmos DSU.
...
Forum: Receivers, Amps, and Processors   02-01-2015, 06:43 AM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
Yup.

Yup.
Forum: Receivers, Amps, and Processors   02-01-2015, 06:41 AM
Replies: 1
Views: 30
Posted By jdsmoothie
No.

No.
Forum: Receivers, Amps, and Processors   02-01-2015, 06:33 AM
Replies: 10,305
Views: 772,745
Posted By jdsmoothie
^^ Not really that much difference in power, so...

^^
Not really that much difference in power, so no, not an issue. Nice idea on the telescoping side surrounds. :)

You could also repurpose the 1610 in a bedroom and pass the Zone 2 HDMI out...
Forum: Receivers, Amps, and Processors   02-01-2015, 06:30 AM
Replies: 9
Views: 67
Posted By jdsmoothie
Yes. The external amp would need to be set to...

Yes. The external amp would need to be set to about 80% max volume and have the AUX IN source selected and using DIRECT/PURE DIRECT mode.
Forum: Receivers, Amps, and Processors   02-01-2015, 06:26 AM
Replies: 2,551
Views: 185,467
Posted By jdsmoothie
What router are you using? You may want to try a...

What router are you using? You may want to try a different router. Have you reviewed the following post in my Troubleshooting section in post #3...
Forum: Receivers, Amps, and Processors   02-01-2015, 06:23 AM
Replies: 2,551
Views: 185,467
Posted By jdsmoothie
There are generally 2 settings on a TV to make...

There are generally 2 settings on a TV to make HDMI(ARC) work: (1) Enable HDMI-CEC (Anynet+ on Samsung), and (2) Set Audio from "TV" to "external speaker"/"home theater." On the AVR there is only...
Forum: Receivers, Amps, and Processors   02-01-2015, 06:14 AM
Replies: 9
Views: 67
Posted By jdsmoothie
The pre-outs should be hot with that AMP ASSIGN...

The pre-outs should be hot with that AMP ASSIGN you are using. Although note using the Bi-amp feature is not likely providing any real benefit, not to mention will prevent you from using an Atmos...
Forum: Receivers, Amps, and Processors   02-01-2015, 06:04 AM
Replies: 4
Views: 37
Posted By jdsmoothie
If the sub has speaker inputs and outputs,...

If the sub has speaker inputs and outputs, connect the FL/FR AVR speaker posts to the sub speaker inputs and connect the sub speaker outputs to the bookshelf speakers.
Forum: Receivers, Amps, and Processors   02-01-2015, 05:40 AM
Replies: 1,186
Views: 96,743
Posted By jdsmoothie
It simply is a marketing term that has been used...

It simply is a marketing term that has been used to describe those D&M units with XT32 the past 2 years.
Forum: Receivers, Amps, and Processors   02-01-2015, 05:33 AM
Replies: 1,383
Views: 77,064
Posted By jdsmoothie
Not sure what you mean? What specific 9.2 or...

Not sure what you mean? What specific 9.2 or 7.2.2 or 7.2.4 setup are you considering as there are several possible combinations?
Forum: Receivers, Amps, and Processors   02-01-2015, 05:29 AM
Replies: 1,383
Views: 77,064
Posted By jdsmoothie
Front Wide will be used with Dolby Atmos.

Front Wide will be used with Dolby Atmos.
Forum: Receivers, Amps, and Processors   01-31-2015, 09:06 PM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
Yes. All 3 speakers should be set to SMALL/60Hz...

Yes. All 3 speakers should be set to SMALL/60Hz or 80Hz when you have a dedicated sub.
Forum: Receivers, Amps, and Processors   01-31-2015, 09:04 PM
Replies: 3
Views: 56
Posted By jdsmoothie
Sure.

Sure.
Forum: Receivers, Amps, and Processors   01-31-2015, 08:52 PM
Replies: 2
Views: 29
Posted By jdsmoothie
Pull the cable from the AVR's sub pre-out and...

Pull the cable from the AVR's sub pre-out and with the sub ON, rub your finger over the cable tip. Hear static from the sub? If yes, issue is with the AVR. If no, issue is with either the cable...
Forum: Receivers, Amps, and Processors   01-31-2015, 08:48 PM
Replies: 2,551
Views: 185,467
Posted By jdsmoothie
The AVR simply passes the video so your PJ should...

The AVR simply passes the video so your PJ should know when it's 3D or not if that is what Auto mode is supposed to do. Try setting the "i/p Scaler" setting on the AVR to OFF. Does the PJ switch...
Forum: Receivers, Amps, and Processors   01-31-2015, 08:42 PM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
It was scheduled for release in January. So...

It was scheduled for release in January. So should be soon. :)
Forum: Receivers, Amps, and Processors   01-31-2015, 08:40 PM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
What AMP ASSIGN configuration are you using? Try...

What AMP ASSIGN configuration are you using? Try the one below:

Amp Assign: 11.1
Height Speakers: 4 Height Speakers
Height Layout: FH + TM
Wide/HT 2: Top Middle
Pre-out: Front + Front Wide
Forum: Receivers, Amps, and Processors   01-31-2015, 08:27 PM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
HDMI will only pass to main zone and Zone 2. ...

HDMI will only pass to main zone and Zone 2. You'll need to connect an optical,digital coax, or analog cable to pass audio from the cable box to Zone 3.
Forum: Receivers, Amps, and Processors   01-31-2015, 08:25 PM
Replies: 5,611
Views: 254,516
Posted By jdsmoothie
The Denon HEOS Link and Sonos Connect both have a...

The Denon HEOS Link and Sonos Connect both have a MSRP of $349.
Showing results 1 to 25 of 5000

 
Forum Jump: