Posts by Slash

No offense taken Batpig...I was steered to the Dnon by a reliable source, albeit he could not name the model. Please steer me to the appropriate Denon model line up where I will sense at least a mild upgrade from the MC1... I have...

I am looking to replace my Lexicon MC1 and Monoprice switcher with a more reliable processor.... All roads seem to point to the Denon AVR-xx13, but I wish to ensure I am not disappointed. I am very pleased with the sound processing that...

Please forgive me if this is not the appropriate thread for this question. I currently am using a Lexicon MC1 for my sound processor(input to Cinepro, Sampson and Hafler amps), and a monoprice HDMI switcher for swithing input to a Moome...

I'm looking for guidance re my Lexicon MC1 and speaker setup Speakers/amps - Front/center/rear SWAN Diva 6.1’s/ C3/2.1’s

Hi... I have the same symptoms and saw this thread indicating it may be the battery.... I opened up the Rock, and saw a place for the battery, but no battery there.... Make me wonder if a battery would solve the problem.... Does anybody...

I have a seven speaker setup with two passive subs... In total I will be running 2400 watts through this system.... 1700 to the speakers... 700 to the subs.. I have run 12AWG in wall speaker wire for all 7 speakers and 2 subs. So all...

I will be installing a DIRECTV sattelite dish on my shop which will require an across the roof, down the wall then direct burial run to the house of approx 175'. Once it reaches the house, it will be split into two runs: 50' to 1...

Thanks Tim... It was the ASR... it was NOT turned on for R02, it was quite odd... when looking at Util,1 for R02 it showed ASR on.... but when I looked at UTIL,3, only R01 was checked? I found it quite painfull getting it turned on...

I have a TAW HD800 PJ, which I am told is a modified Marquee 8110. I have the RECALL memories setup as follows: 1) Memory 01 setup for 60Hz... my Directv STB input 2) Memory 02 setup for 72Hz.. My Rock Pro (video processor) DVD...

Quote: Originally Posted by kal If I can add something to Glen's post. Try this: Pause your movie in some of those scenes with dark areas and increase the brightness only (not contrast) such that you start to see some of the dark...