Posts by dem

B&W recommends a maximum power of 120W for the 805S (and 805D and N805), and a Denon AVR rated at 7 x 135W should be able to put out more than 135W when driving 2 channels (see the Audioholics measurements of the AVR-4810CI...

Quote: Originally Posted by TARJr I've had it over a year, what are my options? Make use of the 2 year warranty, perhaps?

Quote: Originally Posted by blued888 Remember that you would probably have to drill holes into the speakers to mount/hang them on a wall. 685s come with a mounting bracket already attached.

Quote: Originally Posted by noseman I found the tweeter housing to be "a bit flimsy" for my taste. Now, in my dedicated sound room, the only one touching my gear is me, and the tweeter should never be touched anyway, but the plastic...

Quote: Originally Posted by AlexBPM So, if I run audyssey and do an auto setup without any further adjustments... what is the difference between setting EQ to OFF vs Manual? In Off and Manual modes Audyssey doesn't run at all. Both...

Quote: Originally Posted by danielo This has always happened to the top model... But the top model is the AVP-A1HDCI. Quote: Originally Posted by AdamWL Maybe they'll throw us a bone. Audyssey Dynamic Volume was a pretty nice bone.

I don't use the included remotes, but I believe the small one can turn on an individual zone. You can also do it from the web interface. The display will say MAIN ZONE OFF.

Quote: Originally Posted by shamus I just picked up an outdoor wireless speaker (uses its own wireless tech) and needs to be hooked up to analog outs from my 5308. I can't seem to find a way to turn off the main speakers when using...

Quote: Originally Posted by BamaDave OK, guys I need help connecting my 5308 to my remotely located computer and the internet. I have a wireless router, Linksys WRVS4400N and I'm wondering if I should purchase a Wireless Bridge to...

Quote: Originally Posted by homer14 also, the front left channel on the unit has gone out.. I've been following this thread for a while and I don't recall any reports of channel failure. One thing to try is to reset the unit to...