If you can solder then you should have no problem replacing the caps and its only a few dollars in parts.
If its got the hum, good chance the cap fix it, for how long is a whole other question though.
Kevin
Quote:Originally Posted by...
Quote:Originally Posted by Scottyp3 Would a sub hp be overkill for a 13 x 16 sealed room?
There is no such thing as OVERKILL
It will be fun
Mine is in about a 9X 22 room with 7 foot ceiling, and not an HP, I could use more
I cant remember who it is but I am almost sure its in THIS thread
Quote:Originally Posted by ginovino Can anyone direct me to member who repaired his own sub and THEN, when about trying out different values of CAPS, all the way up...
Gino
Do not use a big honking Weller 140W iron just a good old 30W or so from something like radio shack or Parts Express is fine.
Before I got my Vac desloder station, for something like cap replacement you can try a desolder bulb but...
There is no glue but there is a foam gasket that after time and heat has sort of stuck everything real good. also the finish may not have been cured completely before they installed the amp
Take a razor blade and go around the edge of...
Yes the SA1000 amp is customized for both frequency response for the custom driver I have made and also proper limiting. By getting the best possible response curve from the sub/amp system to start with out of the box just gives your...
They probably dont move at all
there are videos out there of a nickel standing on edge during reference level play back of something like U571 or something crazy like that.
The dual opposed design is very stable!
Quote:Originally Posted...
Let me just say that a Single Turbo will give you the same or a little more output than the duals you had now. with much better sound quality than before.
Quote:Originally Posted by urmystlkal I got ya. You think that would be my...
