New Posts  All Forums:

Posts by GGA

Quote:Originally Posted by DonH50 You mean the digital TMDS signal? For HDMI 1.3, termination is to 3.3 V and swing is 400 to 600 mV single-ended into 50 ohms (800 to 1200 mV into 100 ohms differenital). The 1.4 spec is not...
Quote:Note that you cannot "turn on" HDCP manually. The Radiance communicates with the display/projector, and if it says it can handle HDCP, and the KSV keys match, HDCP will be enabled. If you get the message that "output HDCP is...
A couple months ago I ended my Unblockus service for USA Netflix since the max bandwidth I could get was 4300k. Previous to that I could get 5800k with no problem. I would have to reenter Neflix several times to get the top speed. I...
From what I can research AES/EBU has an output voltage that ranges between 2V and 7V with a maximum of 7V and S/PDIF has an output voltage of 0.5V with a maximum of 0.6V (all peak to peak). Does anyone know what is the output voltage of...
DTS has these rather mysterious statements on their website that I have wondered about for awhile: Cinema mode: This mode offers a clear and enhanced Center channel that makes center stage action stand out in movie soundtracks, with a...
Quote:Originally Posted by stephenbr Thanks Nick - interesting to note the option on the last screen shot called 'Direct Mode' that appears to be new - have you tried that? This is in the current menu under Decoder options. The...
Thanks very much for the info and the pics. Never imagined installation would be so easy. I got a missive from Datasat saying I can expect my card sometime in May, so it looks like the colonies are lagging a bit behind.
I kind of remember that my old G15 used an analog stage in its final conversion to light. In later JVCs the analog stage was changed to digital, so that current JVCs are 100% digital. Am I remembering this right?
Quote:Originally Posted by Glimmie One thing the latest generation of high end processors seem to be lacking is surround synthesis features, aka Lexicon Logic 7. Perhaps they do have something similar but it's not mentioned in the...
Quote:Originally Posted by Charles Hansen Addendum to previous post regarding Opticis HDMI cables. The first model on their website (that is fully optical comes) with two power supplies that can deliver 1 full ampere at +5 volts. I...
New Posts  All Forums: