1. Does the 360 have the latest firmware (ie. is it connected to the internet)?
2. What is the connection path between the 360 and the 5500?
I have a 360 and 5500 and when I first got the 5500 I had issues with syncing at 1080p. It wasn't just the xbox, my ps3 also had similar issues @ 1080p. Basically what would happen is I would select 1080p it would test the resolution and the display would go black or flicker. If I ever got to the point I could...
I called SI today and am thinking about upgrading the 91" 16:9 .8 gain screen I purchased last November w/their new 1.4 gain screen.
Would anyone be interested in a perfectly good 91" screen (no frame, I am keeping the existing frame). The frame can be purchased from SI though.
This seems like it would be a little too niche to try and sell on ebay or Craigslist.
Please PM me if you are interested.
No panning problems here... it could very well be your source material, what is it?
Also, be sure to set to Auto the Vertical Sync setting on the projector (don't remember the menu option right now). I think Vertical sync is off by default.
Received mine from the Feb 20th batch as well. They entered the same submission twice so I have another $500 rebate for the same unit set to mail in April . When I emailed to find out why my rebate was not in their system after 10 weeks they had me email them the scanned copies of my docs. Shortly after the new submission was joined by what I assume was the original submission that finally got found/processed.
We'll see if they actually send the second check .
I had to email scanned copies of the information they needed per the email above (sent mine at the start of Dec and had no recognition that it had been received).
I received a followup email to my email yesterday saying the rebate was in process. So if you still have copies of your info scan it and email/fax to them per the instructions above.
The last two on the black scales are black and blacker than black signals. If your setup is not passing blacker than black then they will look the same. This is "ok" if understand the desired effect. At one point I was able to get blacker than black to pass, but can't anymore (PS3->Okyo 606-> HC5500). I have tried RGB/Extended setting on the PS3 and Input Level/Expanded on the HC5500. I have also turned off the Auto Iris during calibration.