Posts by Stereodude

Nitpicking really late here, but FWIW the disc's menu says that the 5th Element has LPCM 5.1 audio when it actually has TrueHD.

Quote:Originally Posted by Fatshaft Ya how come there's no build threads up yet? I haven't received mine so I can't do a build thread! There are quite a few threads over on HTS in the DIY sealed section.

Breakers don't pop instantly so you can easily have transients that exceed those wattages.

Quote:Originally Posted by mtbdudex I spoke with MattP 5 minutes ago, PE staff, he did the driver parametrer measurements himself and stands by them for 1.94 cubic feet sealed for a Qtc of .707 and an F3 of 37.5 Hz. He will send me...

Quote:Originally Posted by Bill Fitzmaurice Don't mount it in the cab, put it in its own box, placed as close as possible to the receiver. Run a long speaker cable rather than a long interconnect, greatly reducing the potential for...

Quote:Originally Posted by Jay1 http://www.parts-express.com/pe/showdetl.cfm?partnumber=300-807That amp will eat up a huge chunk of the interior volume in his 14" cube box. It wouldn't be my choice for a small box. The 500W Bash...

Quote:Originally Posted by dimetera413 Small as in maybe a 14" cube. Budget is 700-800.You can't cheat a few more inches to something like a 17" or 18" cube? A 14" (external) cube built out of 18mm 13 ply Baltic Birch is going to...

Quote:Originally Posted by bippy - you're still wrong about throw distance affecting image brightness--think of taking a picture of a flat object with a 35mm still camera: you can put the camera ten feet away and use a 50mm lens...

Quote:Originally Posted by notnyt Still low, upgrade that service Not sure if you're serious. He's in Japan. Power there is 100Vrms (AC). It's not like the US where it's 120V.

High port air speeds at subsonic frequencies seems like it would be a significant problem. More so than higher more audible frequencies. You're not so likely to hear the fundamental because reduced hearing sensitivity that low, but the...