New Posts  All Forums:

Posts by Stereodude

Of course they take the most useful feature out of them (the DSP) when they sell them directly to consumers. Although, I have it on good authority directly from an OEM user of them that the DSP is the SpeakerPower amps would not be...
"I wish you were D2's! I wish you were D2's! I wish you were D2's!..."
So the idea is to impale anyone who gets too close to the driver while its in operation?
It looks like after considering the displacement of the bracing, driver, and amp I need to make a 16.75" cube (exterior dimensions). The box will be Baltic Birch. I plan to make the box something like this:
I thought the target was an aspect ratio of 8:1 or 9:1 at the most for slotted ports? You would be at 13:1
Quote:Originally Posted by Electrodynamic Still shocked at how everyone at the shop missed that. Looks like I'll be making a trip up there with D2's to swap them out after I get back from CES. Sure we've made a few mistakes on VC...
Quote:Originally Posted by imagic Is that a reading from the LP or close Mic or something else?That is measured from the LP
Good grief... Why D4's though?
Quote:Originally Posted by alphaiii It'll be great to know where the actual filter is on the non-boost versions.I measured a 500W no boost Yung. R23 = 57.6k and R8=10k. That gives a Q of 1.2 and a Fc of 30.14Hz. F3 is ~22Hz with...
So, does the supposedly boost free version still need C13 and C14 of the boost circuit shorted in order to get a flat response controlled only by R8 and R23?
New Posts  All Forums: