Posts by mflaster

Well, I'm saying if you send the projector 640x480, it needs to scale that to 1024x768 to fill the panel. And the projector has a very bad scaler. So even if you get it to work, it won't look good. As far as why the picture is clear...

Well, you want to send it DVD signals, but that's either 480i or 480p. Even if you get it to work, the projector will have to scale 480 lines - and it will look terrible. Myself, I send my projector 720p - from an HTPC - and then I...

It's kindof silly that they have this auto-calibration stuff - but they don't show you what they've done!!! Mike

I'm confused - that page (download here) just talks about the EQ setup. As far as I can tell, it just says that you can either set it to Auto, or Manual. I don't see how it shows the settings from the auto-eq. I've done the automatic...

I just got the Onkyo TX-SR602, and it's great. But the automatic calibration isn't exactly what I expected. This receiver has some EQ bands built in, and one of the setting for EQ is 'auto', i.e., what is computed from the automatic...

I think a component to VGA adapter will help - assuming it can sync to the signal. Mike

Here's what I ended up buying:[list=1][*]Alpha 37C 3-way center from Crutchfield for $230 shipped (with a coupon) - but they're gone now.[*]Alpha 20's for my fronts, I got them off ebay from HarmanKardon for $102.50/pr + $24...

Thanks for the great info everyone! Mike

Thanks for the reply. I guess you're talking about this kit. They also have the instructions online. The steps seemed a bit non-trivial, for example: Quote: If the wires require desoldering, be sure not to over heat the...

I have some ~ 20 year old Boston Acoustics speakers, A-60 series II. They haven't been used much. I was thinking about using them more, and so I decided to try to measure their response, using a tone generator and my Radio Shack SPL...