Posts by shiznit

Also my setup is correct with rasters centered and static convergence nulled. I know this projector was abused because when I got it, static convergence settings were in the 60+ range. :eek: Any tips for replacing this board are...

How do you remove the c-drive from an XG750? I removed the all the wires and ribbon cable and removed the fastening screw to the projector. It is so tight in there, it looks like you have to remove a tube to get this board...

You will need a substance called Dynasolve to remove the old C-Element. The company is as follows: Dynaloy, Inc. 1535 East Naomi Street Indianapolis, Indiana 46203 800-669-5709 or 317-788-5694 You want to order their product...

The Yamaha RX-V2400 or NAD T762/763 will not have any difficulties whatsoever driving the Totem Dreamcatchers and it will sound fantastic as well. If in doubt about the sound, your dealer should be more than willing to let you demo...

Check out Yamaha. You definitely want a receiver that has dynamic power capabilities at 2 ohms. I have driven a complete 4 ohm 5 speaker setup with my Yamaha DSP-A1 with no problems. I recommend this new Yamaha...

I paid $650 for my 2300 hour XG750 including all taxes and shipping. The tubes were absolutely toasted though, so I put new tubes in and now it is perfect.

Were the tubes changed in this projector? Manipulation of the Focus coil fore and aft have a direct bearing on focus of the tubes, and so does the astig rings. When I replaced the tubes in my xg, I set all electronic focus and...

I agree with Nick V 100%. Bryston is not "boomy" or have "edge" they are considered very neutral amps. A Bryston amp will walk all over any Harman Kardon, guaranteed. I know I've owned both (Actually I use to own...

If you are talking XG75 to XG135 NON LC, there is absolutely no difference in picture quality between the two..only scan rates, and no one would ever need all the bandwidth that is available with the XG135 for home theater, ever.

I would go with a Panasonic DVD player (known for spectacular interlaced output) and a Faroudja NRS 1280 X 720 resolution connected via component cables.