Posts by jstrossner

The dish came with Eagle Aspen lnbs. The neck diameter was too big to fit into a two part bracket which attaches to the dish. Solid Signal is aware and is sending out different lnbs. They didn't specify which ones, but Wayne at...

Gimp, That's where I got mine. Excellent service. They are sending replacement lnbs---can't wait to see how the Gainmaster performs.

JohnH, I would try Rudy's suggestion of removing the power. I bought a new audio rack this week and my C2 didn't want to power-up after reconnecting my components. My first thought was that the capacitor problem had reared its ugly...

I talked with Wayne @ Channel Master today. No adapter kit. I just have to get the smaller diameter lnbs.

I just received a Channel Master Gain Master dish with Eagle Aspen lnbs. I was putting the dish together tonight--have an installer coming out tomorrow morning. Has anyone else purchased this combination and been successful in...

Parasound supplies bnc to rca converters with the C2. Jeff

JHL, I had the very same problems with my CB2 and a Sony HD200 directv box. I contacted Theta and was told that they are aware of the problem. The explanation was given that the directv hardware manufacturers weren't following the...

Chris, I used a standard RS232. Get a couple of adapters and you're set. Male at C2 and female at computer. I saw the link for the MX-Editor software at home theater master--the Halo manual says that Parasound's version is...

Chris B, A standard RS232 cable will do the trick. The only one I could find had DB25 connectors at each end, so I got a couple of DB25->DB9 adaptors. Go to upload and bingo. The software is very easy to use. Does anyone have...

I had noticed the PQ improvement with Kthv. I thought I had lost Nbc, but it re-mapped to 4.1 on my Sony. No changes in PQ that I can see. Anyone have information on Katv? Isn't 2/28 their deadline for a digital signal?