Posts by Calabs

Quote: Originally posted by BigguyZ For now I'm curious if anyone has any recomendations on speaker kits ranging around $150-$200 (not incld boxes) or $200-$250 w/ boxes... The audax surrounds would actually fit this criteria, but...

Quote: Originally posted by Rop Hi Ralph, First a question for you: Could you post a larger picture of the stands you made? They sure look good! Stands are my next item on the list. Before my trials with the yellow-glue-iron...

The overall success for this type of veneering is contingent on the amount of time you let the yellow glue dry. If it is dry for too long of a time, the glue begins to cure and harden, and EXTREME heat is needed to melt it. What I have...

Quote: Originally posted by cpufixer1 I was watching the O.C. in HD on Fox and it is not as clear as watching a football game on Fox. Must me shot in a different Res. The OC is most likely converted into HD from film, where a live...

Quote: Originally posted by the-sloth I receive WABC-DT via DNS on D* and notice the audio levels are a quite a bit below other channels. Is this normal? Do you guys get the same results OTA? I've routinely had volume problems...

Quote: Originally posted by jaypb As I said, the PBS station out of Trenton was my first REAL introduction to HD viewing. And I do still miss the HD "flyovers" on the loops that they used to run....and that Rosie Perez 10 minute...

Quote: Originally posted by jaypb Just curious if ANYONE out there is picking up WPIX-DT using a Hughes E86 Directv/OTA STB. I have three of them....and I'm in Central NJ and I just happened to check last night before even realizing...

I really can't remember, as I wrote that article about 3 years ago. The article may mention it. If not, it's easy to figure out. If the braces are 1" all the way around, just measure the cu. in. they take up, then add that in depth to...

Quote: Originally posted by Vper Guess double is it. Well, I am going to double the front and maybe the backs. But the internal volume and the outside dimensions will remain the same. I'll just add to the outside of the...

Is anyone else adding additional baffling along the side walls, or am I the only crazy one in the bunch?!?!